Hifiverse

DACs - Msb Technology The Discrete DAC

Description, images, technical data and specifications

Msb Technology The Discrete DAC
Image source - (c) Msb Technology

The Discrete DAC is the introduction to the DAC range of MSB Technology, a California manufacturer that opened its doors in 1989. It is a fully balanced discrete ladder DAC with volume control, built in a CNC-machined aluminium unibody chassis in matte silver or matte black anodise. European pricing was EUR 11,000, with an optional second power supply at EUR 1,650.

Key specs that matter

Conversion uses two Prime DAC modules. Supported formats are PCM from 44.1 kHz to 3,072 kHz at up to 32 bits and 1x, 2x, 4x and 8x DSD, with DSD via DoP on all inputs. Digital inputs are 1 x RCA coaxial, 1 x XLR, 2 x Toslink and 1 x word-sync, plus 2 advanced isolated input module slots. The XLR analogue output is galvanically isolated, 3.57 Vrms maximum, 300 ohms balanced. Volume control works in 1 dB steps over a range of 0 - 106 and can be disabled in the menu. Chassis dimensions are 432 x 305 x 51 mm (W x D x H), 65 mm with feet, and weight is 8.2 kg. Power consumption is 35 W with a fully configured DAC.

Engineering and use context

MSB states that its low impedance circuitry drives the amplification directly, without buffering. A modular I/O card keeps the converter repairable and upgradeable, and changing this card switches between single-ended and balanced outputs. The clock is integrated.

Its LED display is slaved to the audio clock and refreshed with the Femto Clock as time reference, and the discrete display circuit is enclosed in its own shielded CNC pocket for EMI isolation. Brightness is adjustable, with an auto-off feature. Control is via isolated RS-232, IR remote or the front panel interface. The MSB Remote has stainless steel buttons around a volume wheel in an enclosure machined from an aluminium billet.

Both module slots accept MSB digital inputs. Its Pro USB module offers complete electrical isolation, up to 24 bit/768 kHz, MQA decoding and up to 8x DSD. The MSB Renderer runs on an A5 processor and supports up to 32 bit/768 kHz, MQA, up to 4x DSD, Roon Endpoint, UPnP and DLNA.

Power comes from the separate Discrete Power Supply, which supplies the DAC with dual linear, independent low-noise power streams. It has a CNC unibody aluminium chassis of 210 x 152 x 51 mm, weighs 2.5 kg and is set for 120/240 V (selectable) or 100 V (fixed). One supply is standard, and a second one isolates the power between all major components. The viton feet use an M6x1 thread.

Pairing

The balanced XLR output with volume control allows a direct connection to a power amplifier. A preamplifier is optional. The Premier Digital Director adds four input module slots.

Alternatives

The Premier DAC is the next DAC up in the MSB range.

Specifications

  • Model name

    The Discrete DAC

  • Conversion type

    N/A

  • Engine

    N/A

  • DSD compatability

    Yes

  • Parameters

    up to 32 bit / 3072 kHz and DSD512

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    300 (high gain), 150 (low gain)

  • Output Impedance (single-ended) (Ω)

    N/A

  • Analog outputs

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    N/A

  • Dimensions (mm)

    432 × 305 × 51

  • Weight (kg)

    8.2

  • Official link