The Sentinel DAC is a three-chassis converter system from MSB Technology, presented in July 2025 at USD 375,000. It consists of the Sentinel Digital Director, the Sentinel Analog Converter and the Sentinel Power Supply. MSB names three designers for the project - Jonathan Gullman as CEO and project designer, Dustin Symanski as circuit designer and Daniel Francis as industrial designer.
Key specs that matter
Conversion uses 32 Hybrid DAC MKII modules in a dual mono DAC design, with 16 modules per channel. The Digital Director takes four digital input modules configured for each owner and system. Analogue inputs are 2 XLR and 2 RCA. Outputs are two XLR per channel plus a Confluence output for the Sentinel Amp. The Digital Director measures 444.5 x 419.1 x 108 mm (W x D x H), and the Analog Converter and Power Supply each measure 444.5 x 419.1 x 239.6 mm. Chassis weights are 53.3 kg, 41.3 kg and 21 kg, 115.6 kg in total.
Engineering and use context
The Digital Director performs all digital processes and has a display and front-panel controls. It sends a conversion-ready signal to the left and right mono DACs over two fully isolated fibre optic Sentinel-Links. Inside the Analog Converter are the 32 modules, the Sentinel Clock and a fully independent left and right analogue preamp. MSB quadrupled its previous designs from 8 to 32 modules, and the modules use many thousands of aerospace high-precision resistors. Using so many parallel DAC channels, Dustin Symanski implemented a new version of MSB's Bit Diffusion Technology.
The Sentinel Clock is custom and discretely built. Its ovenized crystal was designed with the crystal wafer manufacturer, and the clock sits on a tuned, isolated energy dispersion platform. Three independent supplies are housed in the Power Supply - one for each mono DAC and an ultra-low noise supply for the clock. Power reaches the Analog Converter over three Summit Power Cables, and six custom wound shielded toroidal transformers are used. Both the Director and the Power Supply have 15 A IEC inputs.
Chassis parts are precision-machined billet components made on 5-axis machines, and the stainless steel name badge is cut with a 0.5 mm endmill. The units are not stackable. Each needs its own shelf with at least 76 mm of clearance above and 51 mm to the sides.
Pairing
The two XLR outputs per channel allow bi-amping, one output for each amplifier. MSB's Sentinel Amp, under development at launch, connects through the Confluence output and uses the low output impedance of all 32 modules in place of a standard XLR input. A rack with three separate shelves is required.
Alternatives
The Cascade DAC is MSB's multi-box converter below the Sentinel, with a Femto 33 MKIII clock.