Hifiverse

DACs - Aries Cerat Kassandra II Reference

Description, images, technical data and specifications

Aries Cerat Kassandra II Reference
Image source - (c) Aries Cerat

The Kassandra II Reference is an R2R digital to analogue converter with a tube output stage from Aries Cerat of Cyprus. Its UK price is GBP 24,950. Aries Cerat created the original Kassandra as the reference source it needed while developing its own loudspeakers and amplifiers, and the series is based on the company's AD1865N-K digital engine.

Key specs that matter

Conversion uses 16 Analog Devices AD1865N-K R2R converters per channel with complementary current output, 8 converters per bank. There is no digital filter. I/V conversion is transformer-based. The gain stage is a transformer-loaded E280F tube with a step-down output transformer with 5 to 1 and 10 to 1 ratios and a double choke-filtered supply. Output level is 30 Vpp at 0 dB (10 V RMS), or 5 V RMS at the -6 dB setting. Output impedance is 50 ohms on balanced and single-ended outputs, and 12 ohms at -6 dB. Outputs are 2 x RCA and 2 x balanced XLR, with a switchable floating RCA ground. USB input accepts up to 24-bit/384 kHz, and S/PDIF and Toslink sources are also supported. Dimensions are 540 x 520 x 165 mm (W x D x H), and weight is 60 kg.

Engineering and use context

Inside, the AD1865N-K chips work as parallel switched resistor ladder converters. Input data is latched and directly refreshes the resistor network, and the internal Super Clock re-clocks and drives this refresh signal. It also re-clocks the XMOS asynchronous USB controller and the S/PDIF receiver, so no word clock input is needed, and it can be bypassed on the fly. Aries Cerat quotes jitter attenuation down to femtosecond level. Thirty-five LC filters with RF chokes and high speed capacitors decouple the digital circuits from the power rails, and eight discrete ultra-low-noise regulators supply the four converter banks.

Custom wideband I/V transformers convert the balanced current output to a single-ended voltage and drive the tube directly. According to the maker, the analogue section is a small single-ended tube amplifier. Its E280F is triode connected and loaded by a large-core step-down transformer, and the tube runs from a choke-regulated supply. A large toroidal transformer and capacitor banks form the main power supply.

Pairing

A preamplifier with balanced XLR or RCA inputs is required. For amplifiers with high input sensitivity the 5 V RMS setting applies. Systems with ground loops can use the floating RCA output.

Alternatives

The Aries Cerat Ithaka is the larger R2R converter of the Ianus Series, with 24 AD1865N-K chips per channel and a third-generation TriodeFet output stage.

Specifications

  • Model name

    Kassandra II Reference

  • Conversion type

    R2R

  • Engine

    N/A

  • DSD compatability

    N/A

  • Parameters

    up to 24/384KHz

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    50

  • Output Impedance (single-ended) (Ω)

    50

  • Analog outputs

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    N/A

  • Dimensions (mm)

    540 x 520 x 165

  • Weight (kg)

    60

  • Official link