Hifiverse

DACs - Aries Cerat Ianus Ithaka

Description, images, technical data and specifications

Aries Cerat Ianus Ithaka
Image source - (c) Aries Cerat

The Ithaka is an R2R digital to audio converter in the Ianus Series of Aries Cerat, the Cypriot maker of tube and TriodeFet electronics and loudspeakers. It pairs an evolved version of the digital engine from the Kassandra LE with the new TriodeFet generation developed for the QuintEssence amplifiers. Recommended retail price is EUR 82,000.

Key specs that matter

Conversion uses 24 Analog Devices AD1865N-K R2R converters per channel with complementary current output, arranged as 12 converters per bank and 48 in total. There is no digital filter. I/V conversion is transformer-based. The gain stage is a third-generation TriodeFet, single-stage and single-ended, operating in class A at 1 A idle current. Output level is 30 Vpp at 0 dB (10 V RMS), output impedance is 1 ohm on balanced and single-ended outputs, and minimum resistive load is 3 ohms. Outputs are 2 x RCA and 2 x balanced XLR, with a switchable floating RCA ground. Inputs are USB at up to 24-bit/384 kHz, AES/EBU, S/PDIF and BNC. Dimensions are 540 x 580 x 165 mm (W x D x H), and total weight unpacked is 160 kg.

Engineering and use context

Inside the converter banks the AD1865N-K chips work as parallel switched resistor ladder converters. Input data is latched and directly refreshes the resistor network, and the internal Super Clock re-clocks and drives this refresh signal. The same clock also re-clocks the XMOS asynchronous USB controller and the S/PDIF receiver, so no word clock input is needed, and it can be bypassed on the fly. Aries Cerat quotes jitter attenuation down to femtosecond level. Seventy LC filters with RF chokes and high speed capacitors decouple the digital circuits from the power rails, and eight discrete ultra-low-noise regulators supply the four converter banks. Its custom wideband I/V transformers convert the balanced current output to a single-ended voltage.

With 1 ohm output impedance the TriodeFet stage can deliver 12 W directly into a loudspeaker, although the maker does not intend the Ithaka as a power amplifier. External resistive modules can pre-load the output stage. Power comes from an external supply unit with two 500 VA toroidal transformers, Schottky SiC discrete rectifiers, more than 4 F of total capacitance, four independent pseudo-battery systems and a triple choke-filtered supply for the TriodeFet stage.

Pairing

A power amplifier or preamplifier with balanced or single-ended inputs is required. The floating RCA output is the option for systems with ground loops. Digital sources connect over USB, AES/EBU, S/PDIF or BNC.

Alternatives

The Aries Cerat Kassandra II Reference is the smaller R2R converter, with 16 AD1865N-K chips per channel and a transformer-loaded E280F tube output stage.

Specifications

  • Model name

    Ianus Ithaka

  • Conversion type

    R2R

  • Engine

    N/A

  • DSD compatability

    N/A

  • Parameters

    up to 24/384KHz

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    1

  • Output Impedance (single-ended) (Ω)

    1

  • Analog outputs

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    N/A

  • Dimensions (mm)

    540 x 580 x 165

  • Weight (kg)

    160

  • Official link