Hifiverse

DACs - Connected-Fidelity DAC-040Mk2 ULT2

Description, images, technical data and specifications

Connected-Fidelity DAC-040Mk2 ULT2
Image source - (c) Connected-Fidelity

The DAC-040Mk2 ULT2 is a USB and S/PDIF digital-to-analogue converter in the Concert Fidelity Reference Series, with tubes in its analogue section. Masataka Tsuda started the company in 1987 and still designs and builds every product at its workshop in Nagano prefecture, Japan. ULT2 is one of four versions of the DAC-040Mk2, and it combines two digital inputs with an AKM converter that supports DSD. No list price is published.

Key specs that matter

Digital inputs are one USB 2.0 Type B port and one S/PDIF coaxial input at 75 ohms, on BNC as standard or RCA as an option. Behind the USB port sits a USB Class 2 to I2S module with 32-bit PCM and DSD64/DSD128 output, followed by an I2S buffer. Conversion uses an AKM 32-bit DAC with DSD. One pair of single-ended RCA outputs is provided. Tube complement is two 12AU7/ECC82 for gain and one 6V4/EZ80 or 6CA4/EZ81 for rectification. Gain is selectable between 6 dB and 12 dB in standard form, or between 0 dB and 6 dB as an option. Dimensions are 450 x 100 x 310 mm (W x H x D), and net weight is 12 kg.

Engineering and use context

Concert Fidelity describes the D/D and D/A section as a full custom order composed of a modular system, with a vacuum tube buffer stage after it. Both gain tubes and the rectifier are accessible from outside through the rear panel, and the maker encourages tube rolling. Concert Fidelity products are supplied without tubes. Each unit has a mains transformer dedicated to the destination country, in versions for 100 V (50/60 Hz), 110-120 V (60 Hz), 220-230 V (50 Hz) and 240 V (50 Hz). Operation at other voltages is not guaranteed, and failures outside the destination country are not covered by the warranty.

Among the sibling versions, the ULT1 keeps the same two inputs but uses a Philips 16-bit non-oversampling (NOS) DAC for PCM at 16 bits and 32, 44.1 or 48 kHz, with a digital isolator. A single USB or RCA S/PDIF input and the Philips chip define the NOS version, while the HR pairs the AKM converter with a USB input only. Tsuda has over 45 years of experience in tube and solid-state amplifier design, and his Direct Signal Path Technology (DSPT) aims to minimise the time the music signal spends in the circuit.

Pairing

A line stage or integrated amplifier with RCA inputs is required. The matching line stage is the Concert Fidelity CF-080LSX4, which uses the same 12AU7/ECC82 tube type. Native DSD over USB requires a USB Audio Class 2 driver on the computer.

Alternatives

The DAC-040Mk2 HR is the Concert Fidelity converter with the same AKM 32-bit DAC and a USB input only.

Specifications

  • Model name

    DAC-040Mk2 ULT2

  • Conversion type

    N/A

  • Engine

    N/A

  • DSD compatability

    Yes

  • Parameters

    up to 32bit and DSD128

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Gain (dBu)

    6dB and 12dB(Std) or 0db and 6db(Option)

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Analog outputs

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    N/A

  • Dimensions (mm)

    450 X 100 X 310

  • Weight (kg)

    12

  • Official link