Hifiverse

DACs - Connected-Fidelity DAC-040Mk2 NOS

Description, images, technical data and specifications

Connected-Fidelity DAC-040Mk2 NOS
Image source - (c) Connected-Fidelity

The DAC-040Mk2 NOS is the single-input version of the DAC-040Mk2 tube-buffered D/A converter from Concert Fidelity. Masataka Tsuda founded the company in 1987 and designs and builds its products as president, working from a workshop in Nagano prefecture, Japan. This converter is offered as ULT1, ULT2, NOS and HR versions. Concert Fidelity publishes no list price, and the price is given on request.

Key specs that matter

Conversion uses a Philips 16-bit DAC of the NOS (non-oversampling) type. One digital input is specified at order, either USB 2.0 Type B or S/PDIF on RCA. On the USB path a D/D converter module outputs PCM at 16 bits and 32, 44.1 or 48 kHz as I2S, followed by a digital isolator. The analogue section has one pair of single-ended RCA outputs. Its tube complement is two 12AU7/ECC82 for gain and one 6V4/EZ80 or 6CA4/EZ81 for rectification. Gain is selectable between 6 dB and 12 dB as standard, or between 0 dB and 6 dB as an option. Dimensions are 450 x 100 x 310 mm (W x H x D), and net weight is 12 kg.

Engineering and use context

Concert Fidelity describes the D/D and D/A section as a full custom order composed of a modular system, with a vacuum tube buffer stage. Input type and DAC chip differ between the four DAC-040Mk2 versions. In the NOS version the 16-bit Philips chip and the 48 kHz USB limit are shared with the ULT1, while the ULT2 and the USB-only HR use an AKM 32-bit DAC with DSD.

The tubes are accessible from outside the rear panel, and tube swapping is possible. Units are shipped without vacuum tubes.

A dedicated power transformer is used for each destination country, with versions for 100 V AC (50/60 Hz), 110 - 120 V AC (60 Hz), 220 - 230 V AC (50 Hz) and 240 V AC (50 Hz). Concert Fidelity does not guarantee operation at other voltages, and failures outside the destination country are not covered by the warranty.

Pairing

A line stage or integrated amplifier with single-ended RCA inputs is required. The matching line stage is the Concert Fidelity CF-080LSX4, with 100 kohm input impedance in a case of the same size. A USB build requires a computer or streamer with 16-bit PCM output, and a coaxial build requires an S/PDIF source such as a CD transport.

Alternatives

The Concert Fidelity DAC-040Mk2 ULT1 has the same Philips 16-bit NOS DAC with two inputs, USB and a 75 ohm coaxial S/PDIF socket.

Specifications

  • Model name

    DAC-040Mk2 NOS

  • Conversion type

    N/A

  • Engine

    N/A

  • DSD compatability

    N/A

  • Parameters

    up to 16 bit / 48 kHz

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Gain (dBu)

    6dB and 12dB(Std) or 0db and 6db(Option)

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Analog outputs

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    N/A

  • Dimensions (mm)

    450 X 100 X 310

  • Weight (kg)

    12

  • Official link