Hifiverse

CD / SACD players and transports — CH Precision D10

Description, images, technical data and specifications

CH Precision D10
Image source - (c) CH Precision

The D10 Reference Transport is a dual-chassis optical disc transport in the 10 Series of CH Precision, the Swiss maker of modular electronics. It was introduced in May 2025, and its design is derived from the D1.5. One chassis holds the disc mechanism, the other its dedicated external power supply. It reads CD, CD-R, CD-RW and MQA-CD as stereo PCM at 16 bit/44.1 kHz, plus single-layer and hybrid stereo SACD as DSD at 1 bit/2.8224 MHz. A converter is not included.

Key specs that matter

Both units measure 440 x 440 x 133 mm (W x D x H). Weight is 42 kg for the transport and 23 kg for the power supply. Each digital output board has one CH-Link HD, one AES/EBU (XLR), one S/PDIF (RCA) and one S/PDIF (TOSLINK) output, and one board is standard. Sample rates are PCM 44.1 - 88.2 kHz at 16 - 24 bit and DSD 2.8224 MHz (DoP on S/PDIF and AES/EBU). MQA is output raw or unfolded to 24 bit/88.2 kHz. Mains supply is selectable 100, 115 or 230 V AC at 47 - 63 Hz, and power consumption is below 0.5 W in standby and 100 W maximum in operation.

Engineering and use context

At the centre is the MORSE laser mechanism, designed and engineered in-house by CH Precision. Its suspended platform combines an aluminium shell with a dense brass core. Four tuned Alpha Gel isolators carry the 13 kg assembly, more than ten times heavier than the mechanism of the D1.5, and set the suspension resonance below 20 Hz. A precision circular level is mounted directly on the transport mechanism, so the optical pickup is aligned independently of chassis position. Discs load from the top into a motorised vertical-access Disc Vault closed by a hybrid-action sealing door.

Inside the external PSU, four galvanically isolated domains supply the transport motor, control, DSP and master clock, with cascaded regulation throughout. The digital outputs are galvanically isolated as well. Options are a second digital output board and a clock sync board, and the D10 runs as clock master or locks to a reference clock or DAC. Its front panel has an 800 x 480 pixel 24-bit RGB AMOLED display and a 10-button interface, with an infrared remote and an Android app. Firmware updates are installed by USB flash drive or over the Internet. Silver is standard, with Anthracite or Champagne as options.

Pairing

The matching converter is the C10 Reference DAC, and third-party DACs connect through AES/EBU or S/PDIF. Its upgrade path is the T10 Reference Clock.

Alternatives

The CH Precision D1.5 is the single-chassis transport/player of the 1 Series.

Specifications

  • Model name

    D10

  • Transport

    Yes

  • Player

    N/A

  • SACD support

    Yes

  • Engine

    N/A

  • Frequency response low +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response low +/- 3dB (for SACD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for SACD) (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Dynamic range (for CD) (dB)

    N/A

  • Dynamic range (for SACD) (dB)

    N/A

  • Signal to Noise Ratio (for CD) (dB)

    N/A

  • Signal to Noise Ratio (for SACD) (dB)

    N/A

  • Total Harmonic Distortion + Noise (for CD) (%)

    N/A

  • Total Harmonic Distortion + Noise (for SACD) (%)

    N/A

  • Dimensions (mm)

    440 x 440 x 133 + 440 x 440 x 133

  • Weight (kg)

    65 (42 + 23)

  • Official link

Related content

More components