Hifiverse

CD / SACD players and transports - Nuprime Audio CDT-9

Description, images, technical data and specifications

Nuprime Audio CDT-9
Image source - (c) Nuprime Audio

The CDT-9 is a CD transport from NuPrime Audio, the company that grew out of NuForce and makes compact half-width components. NuPrime describes it as a professional music CD transport. Its rear panel has optical, coaxial, AES/EBU and HDMI I2S digital outputs and no analogue outputs.

Key specs that matter

Optical output runs at up to 24 bits/192 kHz (DoP64). Coaxial, AES/EBU and HDMI I2S outputs run at up to 24 bits/768 kHz (DoP256). Bit resolution is 24 bits. For the optical output the sample rate converter offers 44.1, 48, 88.2, 96, 176.4 and 192 kHz and DoP64, and for the other three outputs it adds 352.8, 384, 705.6 and 768 kHz with DoP64, DoP128 and DoP256. DC power input is 12 to 15 V, with worldwide AC voltage of 100 - 240 V AC and a slow-blow 1 A fuse. The transport measures 55 x 235 x 281 mm (H x W x D) and weighs 4 kg. NuPrime gives a one-year warranty.

Engineering and use context

Decoding uses a DSP-based decoder with all Red Book error-correction capabilities. Disc reading and error-correction control run on an ARM LPC2103F chip, and a Philips SAA7824HL chip covers laser read/write head control and decoding. NuPrime specifies master-clock control of the entire decoding system. According to NuPrime, the single-speed drive minimises vibration and the problems of unbalanced discs.

With the sample rate converter, CD playback can be upsampled to higher PCM rates or to DSD. Inside is a custom R-type professional transformer with shielding. Its coaxial output has a dedicated isolation transformer. NuPrime calls the HDMI I2S output a low-jitter I2S output for professional use and states that it is intended for other NuPrime products and may not work with other devices.

An external AC adapter is included, and NuPrime offers the CDT-9 bundled with its LPS-212 power supply as the recommended option. Each unit comes with an aluminium remote control and NuPrime vibration-free isolation feet. The case is black or silver anodised aluminium.

Pairing

A DAC with a coaxial, AES/EBU or optical input is required. Through HDMI I2S the CDT-9 connects to NuPrime converters such as the DAC-9X, and NuPrime lists the STA-9X amplifier as a related product. The matching power supply upgrade is the LPS-212.

Alternatives

NuPrime also made the CDT-8 Pro, an older CD transport of the same kind.

Specifications

  • Model name

    CDT-9

  • Transport

    Yes

  • Player

    Yes

  • SACD support

    N/A

  • Engine

    N/A

  • Frequency response low +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response low +/- 3dB (for SACD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for SACD) (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Dynamic range (for CD) (dB)

    N/A

  • Dynamic range (for SACD) (dB)

    N/A

  • Signal to Noise Ratio (for CD) (dB)

    N/A

  • Signal to Noise Ratio (for SACD) (dB)

    N/A

  • Total Harmonic Distortion + Noise (for CD) (%)

    N/A

  • Total Harmonic Distortion + Noise (for SACD) (%)

    N/A

  • Dimensions (mm)

    55 x 235 x 281

  • Weight (kg)

    4

  • Official link

More components