Hifiverse

CD / SACD players and transports - Nuprime Audio CDT-8 Pro

Description, images, technical data and specifications

Nuprime Audio CDT-8 Pro
Image source - (c) Nuprime Audio

The CDT-8 Pro is a CD transport from NuPrime Audio with digital outputs only and no internal DAC. NuPrime listed it at USD 999 and now places it among its discontinued products. The aluminium case is anodised black or silver.

Key specs that matter

Four digital outputs are provided. Coaxial, AES/EBU and HDMI I2S carry up to 24 bits/768 kHz (DoP256), and the optical output is limited to 24 bits/192 kHz (DoP64). The selectable sampling rate converter offers 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384, 705 and 768 kHz plus DoP64, DoP128 and DoP256. Supported discs are CD-DA, CD-R and CD-RW. Mains input is 100 - 240 V AC with a 1 A slow-blow fuse. Dimensions are 55 x 235 x 300 mm (H x W x D), and weight is 4 kg.

Engineering and use context

NuPrime uses a DSP-based decoder with full Red Book error correction and master-clock control of the entire decoding system for lower jitter. Laser head control and decoding are done by a Philips SAA7824HL, and an ARM LPC2103F chip controls reading and error correction. NuPrime states that single-speed operation of the transport minimises vibration and the effect of unbalanced discs. An additional algorithm reduces digital interference.

For sample rate conversion, the CD data is upsampled to the megahertz range before being down-converted to the target rate. Its coaxial output has a dedicated isolation transformer. HDMI I2S is a low-jitter output intended for NuPrime products, and NuPrime warns that it may not work with other devices. The manual gives the full I2S pin definition, including master clock lines and a DSD ON pin.

Power comes from a custom R-type professional transformer with shielding, and standby consumption is low. NuPrime vibration-free isolation feet are mounted under the case. Front panel controls cover open/close, stop, play/pause, standby and track selection, and the display shows total tracks and total album time once a disc is loaded. Sample rate selection, display information and the playback modes Repeat One, Repeat All, Shuffle All and Shuffle Repeat are on the aluminium remote control. NuPrime gives a one-year warranty.

Pairing

An external DAC is required. The full 768 kHz and DoP256 range requires a DAC with an AES/EBU or coaxial input at those rates. NuPrime DACs with an I2S input match the HDMI I2S output.

Alternatives

The NuPrime CDT-9 is the later CD transport in the NuPrime range.

Specifications

  • Model name

    CDT-8 Pro

  • Transport

    Yes

  • Player

    Yes

  • SACD support

    N/A

  • Engine

    N/A

  • Frequency response low +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response low +/- 3dB (for SACD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for SACD) (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Dynamic range (for CD) (dB)

    N/A

  • Dynamic range (for SACD) (dB)

    N/A

  • Signal to Noise Ratio (for CD) (dB)

    N/A

  • Signal to Noise Ratio (for SACD) (dB)

    N/A

  • Total Harmonic Distortion + Noise (for CD) (%)

    N/A

  • Total Harmonic Distortion + Noise (for SACD) (%)

    N/A

  • Dimensions (mm)

    55 x 235 x 300

  • Weight (kg)

    4

  • Official link

More components