Hifiverse

CD / SACD players and transports — Pro-Ject CD Box E

Description, images, technical data and specifications

Pro-Ject CD Box E
Image source - (c) Pro-Ject

The CD Box E is an ultra-compact CD player from Pro-Ject Audio Systems of Austria and the first CD player in the brand's entry-level E line. Its front panel is the same brushed and anodised aluminium used on Pro-Ject's S, DS and RS players, and the combination of aluminium front and metal chassis follows the original CD Box. List price is EUR 279, in silver or black.

Key specs that matter

Supported format is Red Book CD-DA. D/A conversion uses an MS8413 converter. Output level is 1.8 Vrms at 0 dBFS from one pair of RCA sockets, and a coaxial S/PDIF output is also provided. Frequency response is 20 Hz - 20 kHz (-0.2 dB). THD at the analogue output is 0.04% (1 kHz), noise floor is better than 85 dB, and channel separation is better than 65 dB. Power comes from an external 12 V/2 A DC supply. The player measures 206 x 55 x 153 mm (W x H x D), or 160 mm deep including the sockets, and weighs 1.43 kg without the power supply.

Engineering and use context

Inside is a true Red Book CD-DA drive in shock-proof mounting, loaded through a slot-in mechanism. According to Pro-Ject, drive and architecture allow bit-accurate CD playback. The DAC section is a low-jitter, multi-bit delta-sigma design specified at 24 bit/192 kHz. An output buffer with very low output impedance drives the line output and reduces the influence of interconnects and cables.

Apart from the aluminium front, the chassis is made of rigid sheet metal for stability and protection against external mechanical and electromagnetic interference. Aluminium buttons on the front and the supplied remote control cover play, pause, stop, track skip, scan and repeat of one track or the whole disc. A display shows the number of tracks, total and elapsed time and the playback status. Standby consumption is below 0.5 W. Pro-Ject specifies the player for full-size, fully circular discs only and does not recommend shaped discs.

Pairing

A line-level analogue input on an integrated amplifier or preamplifier is required. The coaxial S/PDIF output connects to an external DAC with a coaxial input.

Alternatives

The CD Box S3 is the next CD player in the Pro-Ject range, with an aluminium case, a 39 mm (1.54-inch diagonal) display, a PCM5102 converter and 2.0 Vrms output.

Specifications

  • Model name

    CD Box E

  • Transport

    Yes

  • Player

    Yes

  • SACD support

    N/A

  • Engine

    N/A

  • Frequency response low +/- 3dB (for CD) (Hz)

    20

  • Frequency response high +/- 3dB (for CD) (Hz)

    20 000

  • Frequency response low +/- 3dB (for SACD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for SACD) (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    1.8

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Dynamic range (for CD) (dB)

    N/A

  • Dynamic range (for SACD) (dB)

    N/A

  • Signal to Noise Ratio (for CD) (dB)

    N/A

  • Signal to Noise Ratio (for SACD) (dB)

    N/A

  • Total Harmonic Distortion + Noise (for CD) (%)

    0,04

  • Total Harmonic Distortion + Noise (for SACD) (%)

    N/A

  • Dimensions (mm)

    206 x 55 x 153

  • Weight (kg)

    1.43

  • Official link

More components