The 102 is a CD player with a front-loading tray from the Classic Line of Burmester Audiosysteme in Berlin. It was built from about 2010 to 2016 and sold at about USD 10,000. It plays audio CDs only, and its two digital inputs let it work as a D/A converter for other digital sources. Burmester names it as the partner for the 101 integrated amplifier.
Key specs that matter
An internal sample rate converter runs at 96 kHz or 192 kHz, chosen with the AUDIO button, and Burmester recommends 96 kHz. Digital inputs are one RCA (75 ohms) and one TORX optical. Two digital outputs, RCA and TOTX, carry the data of the selected input. Analogue outputs comprise a balanced XLR pair, an unbalanced RCA pair and a TAPE output. Power consumption is about 23 W in operation and less than 1 W in standby. Dimensions are 482 x 95 x 320 mm (W x H x D), and weight is about 7.5 kg.
Engineering and use context
Its power supply adjusts automatically to the mains voltage. On the balanced output pin 1 is ground, pin 2 negative and pin 3 positive. An AUDIO LED on the front lights when the converter runs at 192 kHz.
BurLink interfaces on the rear, RS-232 and USB with transmit and receive LEDs, accept a PC, Crestron or AMX system for control. DC IN and DC OUT jacks switch another Burmester unit on and off with the 102 as master, or let the 102 follow as slave.
During CD playback the display shows the track and, via the MODE button, elapsed or remaining time of the track or the whole disc. When a digital input receives no valid data, the input name blinks. Display brightness has four steps down to off. In the SYSTEM SETUP menu the AUTO item starts playback after the tray closes, SNR shows the type and serial number, RC-I enables input selection from the remote, and DEFAULTS restores factory settings. Up to 50 tracks can be programmed, only from the remote. Supplied in the box are the player, an AC power cord, the remote control and the owner's manual.
Pairing
The matching integrated amplifier is the Burmester 101. A preamplifier or integrated amplifier with balanced or unbalanced line inputs is required. The TAPE output connects to an analogue recorder.
Alternatives
The 089 is Burmester's top-loading, belt-drive CD player in the Top Line.