Hifiverse

CD / SACD players and transports — Burmester 089

Description, images, technical data and specifications

Burmester 089
Image source - (c) Burmester

The 089 is a top-loading, belt-drive CD player in the Top Line of Burmester Audiosysteme. According to Burmester, it combines new developments with technologies taken from its Reference Line. It was first shown at CES 2010 at about USD 33,000.

Key specs that matter

Sample rate conversion is selectable to 96 kHz/24-bit or 192 kHz/24-bit. Two S/PDIF digital inputs accept signals up to 192 kHz, one optical and one RCA for 75-ohm coaxial cable. A balanced XLR input accepts one analogue source, and an adapter allows RCA use. Analogue outputs are one balanced XLR, one unbalanced RCA and an RCA tape output at fixed level. Two S/PDIF digital outputs, optical and coaxial, are intended for digital recording. Power consumption is 28.3 W in operation and 2.4 W in standby. Burmester's product information gives 483 x 114 x 335 mm (W x H x D) and 13 kg.

Engineering and use context

Its belt drive decouples the laser optics from the drive motor, and Burmester states that the disc readout is then free of electrical jitter. The drive sits in a massive, low-resonance drive chamber. Like all Burmester components, the D/A converter uses a balanced circuit. Filter and output stages have a fully DC-coupled signal path without coupling capacitors.

X-Amp2 modules, previously found only in Reference Line units, are used in the analogue outputs, as in the 088 preamplifier and the 069 reference CD player. Supply voltages for the analogue and digital sections are separated, and the analogue supply has additional filtering. External digital sources pass through the same converter and its sample rate conversion.

Output gain is set to FIX for a preamplifier or integrated amplifier, or to VARIABLE for a power amplifier or active loudspeakers, with volume in 20 steps. With the XLR input and variable output, the 089 also works as a preamplifier. A setup menu covers auto start, the gain mode, serial number display, display content, power-on volume and factory defaults. Display brightness has four steps and an off setting. The feet use carbon-fibre springs for resonance decoupling. An MMI (Multi Media Interface) slot is reserved for future extensions. Up to 50 tracks can be programmed. DC IN/OUT jacks give master/slave switch-on with other Burmester units, BurLink allows control over RS-232 and USB, and a system remote control is included.

Pairing

A preamplifier or integrated amplifier with a balanced input is required in FIX mode. In VARIABLE mode a power amplifier or active loudspeakers connect directly.

Alternatives

The 069 is Burmester's Reference Line CD player.

Specifications

  • Model name

    089

  • Transport

    N/A

  • Player

    Yes

  • SACD support

    N/A

  • Engine

    N/A

  • Frequency response low +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for CD) (Hz)

    N/A

  • Frequency response low +/- 3dB (for SACD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for SACD) (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Dynamic range (for CD) (dB)

    N/A

  • Dynamic range (for SACD) (dB)

    N/A

  • Signal to Noise Ratio (for CD) (dB)

    N/A

  • Signal to Noise Ratio (for SACD) (dB)

    N/A

  • Total Harmonic Distortion + Noise (for CD) (%)

    N/A

  • Total Harmonic Distortion + Noise (for SACD) (%)

    N/A

  • Dimensions (mm)

    482 × 111.7 × 329

  • Weight (kg)

    13

  • Official link

More components