The X12+ is a sealed push-pull subwoofer from M&K Sound and the middle model of the X+ Series, between the X10+ with two 254 mm drive units and the X15+ with two 381 mm units. Miller & Kreisel dates back to the 1960s, and in 1991 it was one of the first manufacturers in the Lucasfilm Home THX program. The X12+ appeared in 2022 as the successor to the X12, with a UK list price of GBP 3,995. It carries single-sub THX Ultra certification.
Key specs that matter
Two 305 mm extra long throw drive units are mounted in a sealed enclosure. An ICEpower class D amplifier with analogue input and switch mode power output is rated at 600 W RMS and 1,200 W peak, against 400 W and 700 W in the X12. Frequency response is 18 - 200 Hz (average in-room response, ±3 dB). THX EQ and Anechoic EQ modes both roll off at 18 Hz (-6 dB at 20 Hz nearfield). Power consumption is 110 W average, 700 W maximum and 0.5 W in standby. Dimensions are 728 x 450 x 385 mm (H x W x D) and net weight is 45.9 kg in satin black.
Engineering and use context
One driver sits on the front baffle, while the second is mounted inverted in the bottom panel with the front of its cone facing the inside of the cabinet. Driven electrically out of phase, the pair cancels each other's even-order harmonic distortion products, and M&K quotes double the efficiency of a single 305 mm driver and a total output gain of 6 dB. Cone area is 1,458 cm2, 40% more than in the X10+.
Cones and dust caps are a carbon fibre sandwich with a foam inner layer. Each 65 mm overhung voice coil is wound on an aluminium former, with a winding length over 47 mm in a 10 mm top plate for up to ±18 mm of linear stroke. CNC-machined extruded aluminium Distortion Killer shorting rings and aluminium pole spacers sit in the double stack ceramic magnet system. NBR rubber half-roll surrounds, a Conex spider of cotton and Nomex and open cast aluminium baskets complete the drivers.
Its cabinet uses full 25 mm MDF construction and bracing. Larger front and rear vents at the base of the bottom woofer reduce distortion from air turbulence and double as carrying handles. A Headroom Limiter Maximizer provides dynamic driver excursion control, and auto power on/off is standard. The grille attaches magnetically.
Pairing
Line-level connections are two RCA and two XLR, as left/right inputs and outputs. A bypass mode is provided for a surround processor with bass management, alongside a fixed 80 Hz THX filter and a 40 - 125 Hz fourth-order variable low pass. Phase is continuously variable from 0 to 180 degrees.
Alternatives
The M&K X15+ is the larger model of the X+ Series, with two 381 mm drive units in the same push-pull sealed layout.