Hifiverse

Subwoofers — Wharfedale WH-D8

Description, images, technical data and specifications

Wharfedale WH-D8
Image source - (c) Wharfedale

The WH-D8 is the smaller of the two active subwoofers in the WH-D range from the British loudspeaker maker Wharfedale, with the WH-D10 above it. Its cabinet has a high-gloss lacquered front baffle, and Wharfedale styled the pair to match the Diamond 200 series. The American list price was USD 449, and in Australia it sold for AUD 699.99.

Key specs that matter

Wharfedale describes the format as an Active Dynamic-Drive IB subwoofer system. It has one 200 mm long-throw cone driver. Frequency response is 40 - 120 Hz (±3 dB). Amplifier power output is 70 W, with 150 W peak power output. Average maximum output is 105 dB at 1 m, and the signal-to-noise ratio is 85 dB or better. Line input sensitivity is 100 mV for maximum output. Input impedance is 10 kohms on the stereo line inputs and 5 kohms on the LFE input. Crossover range is 40 - 150 Hz. Height is 298 mm plus 30 mm for the spikes, width 268 mm and depth 300 mm plus 22 mm. Net weight is 7.5 kg.

Engineering and use context

According to the product page, the D8 uses an active dynamic drive subwoofer system in a sealed box. On the rear panel sit a power indicator, a volume control, the crossover frequency control, a phase switch, an auto sense switch, the line level and LFE inputs, an IEC mains socket, a mains fuse and a mains power switch. Phase is switchable between 0 and 180 degrees. With auto sense on, the amplifier is activated as soon as an audio signal is detected and returns to mute after about 20 minutes without signal. Spikes and an IEC power cord are supplied as standard. Finishes are black woodgrain and white pebble grain, sold in Australia as piano black and piano white.

Pairing

A line-level source is required - the LFE or subwoofer output of an AV processor, a spare preamplifier output or a stereo subwoofer output. With separate pre and power amplifiers, the stereo line inputs connect through two RCA Y adaptors in the pre-out/main-in loop. The subwoofer has no speaker-level inputs.

Alternatives

The WH-D10 is the larger model of the range, with a 250 mm driver, 150 W amplifier power output and 110 dB average maximum output.

Specifications

  • Model name

    WH-D8

  • Frequency Response low +/- 3dB (Hz)

    30

  • Frequency Response high +/- 3dB (Hz)

    200

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    70 (RMS); 150 (Peak)

  • Size (sm)

    29.8 x 26.8 x 30.0

  • Weight (kg)

    7.5

  • Official link