Hifiverse

Subwoofers — Wharfedale SW-12

Description, images, technical data and specifications

Wharfedale SW-12
Image source - (c) Wharfedale

The SW-12 is the 300 mm subwoofer in Wharfedale's SW series, placed between the SW-10 and the SW-15. Its format is given by the British company as an Active Dynamic-Drive IB subwoofer system, and the series is presented for movies and music. Pricing was USD 999 in the United States and AUD 1,399.99 in Australia.

Key specs that matter

Drive unit is 1 x 300 mm long-throw cone. Frequency response is 35 - 120 Hz (±3 dB). Amplifier power output is 300 W, and peak power output is 450 W. Average maximum output at 1 m is 118 dB. For maximum output the line input needs 200 mV. Input impedance is 10 kohms (line input) and 5 kohms (LFE). S/N ratio is 85 dB or better. Dimensions are 430 mm high, or 488 mm with feet, 395 mm wide and 422 mm plus 15 mm deep. Net weight is 22.1 kg.

Engineering and use context

Like the rest of the current SW range, the SW-12 uses a non-pressed paper cone. Wharfedale cites increased self-damping, improved transient impact and greater structural rigidity of the cone. Copper lining in the centre vents reduces magnetic distortion and improves heat dissipation. According to Wharfedale, its power amplifier is optimised for high impact at low frequencies.

Controls and connections are grouped on the rear panel - auto sense switch, phase switch (0 or 180 degrees), crossover frequency control covering 30 - 150 Hz and volume control, plus the line level and LFE inputs, mains fuse, IEC mains input socket and mains power switch. In auto sense mode the amplifier switches on immediately when an audio signal is detected and enters mute status after about 20 minutes with no signal, lowering power consumption. Setting the switch to off disables this function. This is a Class II, double-insulated appliance, and an IEC power cord is included.

Four cabinet finishes are listed - rosewood, walnut pearl, white sandex and blackwood vinyl, each with a high-gloss baffle. A standard 3-year warranty applies.

Pairing

Two RCA sockets form the stereo line input for a preamplifier output or a stereo subwoofer output. An A/V processor connects to the mono RCA LFE input. Wharfedale uses the higher crossover settings for small bookshelf speakers and the lower settings for large floorstanding models.

Alternatives

The Wharfedale SW-15 is the largest model in the series, with a 380 mm long-throw cone and a 400 W amplifier.

Specifications

  • Model name

    SW-12

  • Frequency Response low +/- 3dB (Hz)

    35

  • Frequency Response high +/- 3dB (Hz)

    120

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    300 (RMS); 450 (Peak)

  • Size (sm)

    43.0 × 39.5 × 44.5

  • Weight (kg)

    22.1

  • Official link