The TRUE X SUB 100A, model code SW-X100A, is a wireless subwoofer from Yamaha and the dedicated subwoofer for the True X Bar 40A soundbar (SR-X40A). It connects to the soundbar through Yamaha's True X Surround wireless system. The box contains the subwoofer and a power cord.
Key specs that matter
The enclosure is bass reflex, not magnetically shielded, with one 16 cm cone driver. Maximum rated amplifier output is 100 W. Frequency response is 35 Hz - 100 Hz. The wireless link uses the 5 GHz band (5775 - 5875 MHz in UK and European models) at 13.8 dBm (24 mW) EIRP, with a range of about 10 m without interference. Power supply is 100 - 240 V AC, 50/60 Hz, consumption is 18 W, and network standby consumption is 2.0 W. Dimensions are 187 x 407 x 409 mm (W x H x D) and weight is 9.4 kg.
Engineering and use context
Unlike the NS-SW series, this model has neither Advanced YST nor a Twisted Flare Port.
On the rear panel are a SETUP button, a white CONNECT indicator and a red STANDBY indicator. About one minute after it is plugged in, the subwoofer starts waiting for the soundbar, and holding SETUP for five seconds puts it into pairing manually. Once paired, it switches off together with the soundbar and reconnects automatically the next time the soundbar is turned on. If the link is interrupted for more than 20 minutes, it goes into standby. Firmware can be updated to add functions or fix faults, and a protection circuit blocks power-up in case of a fault.
Pairing
The True X Bar 40A soundbar is required. Pairing is started from the SETUP button of the soundbar remote. Subwoofer and soundbar firmware versions must be compatible.
Alternatives
The MusicCast SUB 100 is Yamaha's other wireless subwoofer, for the MusicCast network platform.