Hifiverse

Subwoofers — Yamaha NS-SW050

Description, images, technical data and specifications

Yamaha NS-SW050
Image source - (c) Yamaha

The NS-SW050 is a compact powered subwoofer from Yamaha with a 200 mm cone woofer, a Twisted Flare Port and Advanced YST II drive with discrete amplifier circuitry. Its cabinet has a gently rounded form with a slanted front surface and is offered in black, walnut and white. One owner's manual covers it together with the larger NS-SW100.

Key specs that matter

Driver is a 200 mm cone woofer of the non magnetic shielding type. Amplifier output is 50 W (100 Hz, 5 ohms, 10% THD), and dynamic power is 100 W (5 ohms). Frequency response is 28 Hz - 200 Hz. Power consumption is 40 W. USA and Canada models run on AC 120 V, 60 Hz, while Asia and General models have a VOLTAGE SELECTOR switch for 110 - 120 V or 220 - 240 V, 50/60 Hz. Dimensions are 291 x 292 x 341 mm (W x H x D), and weight is 8.5 kg.

Engineering and use context

Yamaha introduced YST (Yamaha Active Servo Technology) in 1988, with a direct connection between amplifier and speaker. Under negative impedance drive of the amplifier, the driver works together with the resonance between cabinet volume and port. Yamaha calls this the air woofer concept and states that it gives more resonant energy from a smaller cabinet than the standard bass reflex method.

Advanced YST II is the second generation. Seen from the amplifier, speaker impedance changes with frequency, and the new circuit combines negative-impedance and constant-current drives. Its Advanced Negative Impedance Converter (ANIC) circuits optimise the effective speaker impedance.

In a conventional bass reflex port, air turbulence at the port ends contains frequency components that are not present in the input signal. Each end of the Twisted Flare Port widens in a modified way and has a twist. This flared, gently twisting shape diffuses the vortex of air around the port edge and suppresses airflow turbulence and port noise.

On the rear panel sit the VOLUME control, a green Power indicator, the POWER switch and a single INPUT (FROM AMPLIFIER) terminal. There is no crossover or phase control on the subwoofer itself.

Pairing

A pin cable to the subwoofer output of an amplifier or AV receiver is required. Without a subwoofer output, the line output such as PRE OUT is used. Crossover frequency is set in the amplifier or receiver.

Alternatives

The Yamaha NS-SW100 is the larger model from the same manual, with a 250 mm woofer, 25 Hz - 180 Hz and 12 kg.

Specifications