Hifiverse

Subwoofers - JBL STUDIO 650P

Description, images, technical data and specifications

JBL STUDIO 650P
Image source - (c) JBL

The Studio 650P is a 10 in. powered subwoofer from the JBL Studio 6 home loudspeaker series, sold as a 500-watt powered subwoofer. It is the smaller of two Studio 6 subwoofers, below the 12 in. Studio 660P. The cabinet has a magnetically attached grille and is offered in Wood and Dark Wood finishes.

Key specs that matter

Its driver is a front-firing 254 mm PolyPlas cone low-frequency woofer. Amplifier power is 250 W RMS (500 W dynamic). Frequency response is 28 Hz - 150 Hz. The crossover is variable from 50 Hz to 150 Hz at 24 dB/octave. Enclosure type is bass reflex via a bottom-firing tuned port. Controls are auto power, crossover, level and phase, and the input is one line-level LFE input. Mains versions are 120 V, 60 Hz (US) and 220 - 230 V, 50/60 Hz (EU). Power consumption is below 0.5 W in standby and 335 W at maximum (2.1 A at 230 V, 4 A at 120 V). Dimensions are 395 x 395 x 395 mm (W x D x H), and weight is 10.4 kg.

Engineering and use context

The crossover control adjusts the built-in low-pass filter of the subwoofer. When the receiver or processor supplies a low-pass filtered LFE signal, JBL specifies the crossover control turned fully clockwise. This setting bypasses the internal crossover. Connection from preamplifier outputs is also possible with an RCA Y-adapter. The LFE cable is not supplied.

In the Auto position of the power mode switch the subwoofer stays in standby, switches on when it detects an audio signal and returns to standby after about 10 minutes without signal. An LED glows blue when the unit is on and red in standby, and a separate rear power switch turns it off completely. The phase switch sets whether the cone moves in phase with the main speakers, and Normal is the usual position. Each unit ships with a power cord, four carpet spikes and the owner's manual.

Pairing

An AV receiver or processor with a dedicated subwoofer or LFE output is required, or a preamplifier output with a Y-adapter. The matching speakers are the Studio 6 floorstanding, bookshelf and centre models.

Alternatives

The JBL Studio 660P is the larger Studio 6 subwoofer, with a 305 mm PolyPlas woofer and 500 W RMS (1000 W dynamic).

Specifications

More components