Hifiverse

Subwoofers - Polk Audio Signature Elite ES10

Description, images, technical data and specifications

Polk Audio Signature Elite ES10
Image source - (c) Polk Audio

Signature Elite ES10 is the 10-inch model among the three powered subwoofers of Polk Audio's Signature Elite series, placed between the ES8 and the ES12. Polk intends it for midsize home-theater and music systems and for multi-use spaces. US price is USD 699, and black is the only finish.

Key specs that matter

This is a vented subwoofer with a front-firing, high-excursion long-throw 254 mm woofer that has a mineral-filled polypropylene cone. Two internal Power Ports vent the cabinet. A Class D amplifier rated at 200 W continuous (RMS) is built in. Frequency response is 28 Hz - 250 Hz (-3 dB) and 22 Hz - 375 Hz (-10 dB). Lowpass filter adjustment range is 50 Hz - 160 Hz, plus an LFE setting. Phase is adjustable from -135° to +180° in 45° increments. Inputs are one LFE RCA and a stereo line-level pair (2 x RCA). Dimensions are 438 x 331 x 419 mm (H x W x D), and weight is 17.7 kg.

Engineering and use context

Polk describes the enclosure as an acoustically optimized cabinet, rigidly built and ported, with FEA-optimized internal bracing that minimizes resonances. Both Power Ports face forward, and according to Polk they minimize turbulence and reduce noise and distortion. Its feet are permanently installed and have no levelling adjustment.

Signal processing is done by DSP with 32-bit floating point resolution, group delay-minimizing filters and precision limiters. Time-Smart Phase Control gives 360 degrees of phase adjustment centred on the lowpass filter setting. The lowpass filter itself is a 4th-order type. When a cable is connected to the LFE input, the ES10 detects it, switches to LFE mode and bypasses its own lowpass filter.

Volume (steps 1 - 40), lowpass frequency and phase are set with +/- pushbuttons on the back panel, and LED strips show each setting. Factory defaults are volume 20, 80 Hz and 0 degrees. An Auto On / Always On switch selects the power mode. In Auto On the subwoofer leaves standby when an audio signal arrives and returns to standby about 20 minutes after the signal stops, and an auto-sensing power supply reduces consumption when the unit is not in use. A main on/off rocker switch sits next to the AC inlet, and the grille is detachable.

Pairing

An AV receiver or processor with a dedicated LFE channel or subwoofer pre-out connects to the LFE input. A stereo amplifier or preamplifier connects to the line inputs through a post-volume left and right pre-out, not a tape-out or record-out. There are no speaker-level inputs.

Alternatives

The Signature Elite ES12 is the larger model of the series, with a 305 mm woofer, a 300 W amplifier and a response down to 22 Hz (-3 dB).

Specifications