The PSW 111 is a compact powered subwoofer from the PSW series of Polk Audio, now listed as an archived model in the company's catalogue. A single Klippel-optimized driver and a Class D amplifier share a vented cabinet, and the unit accepts both line-level and speaker-level connections.
Key specs that matter
Driver complement is one 203 mm round Dynamic Balance driver with a composite cone. Polk quotes bass response down to 38 Hz. The enclosure is vented, with a downward-firing port. Line inputs are a stereo pair of RCA sockets, the right one doubling as the unfiltered LFE input, and speaker-level inputs are two pairs of gold-plated spring terminals. The cabinet is 308 mm high, 279 mm wide and 330 mm deep, oriented vertically, and weighs 9.21 kg in a black finish. Warranty is 3 years on the electronics and 5 years on the driver for the original purchaser.
Engineering and use context
The rear panel carries a volume control, a low-pass control with markings at 60, 90 and 120 and an extra LFE position, and a phase switch. In the LFE position the internal filter is bypassed and the filter built into the AV receiver is used, with a single RCA cable from the receiver's Sub Out to the R/LFE input. For a stereo or Dolby Pro Logic receiver without a Sub Out, the receiver's front speaker outputs connect to the speaker-level inputs, and the front speakers connect to the speaker-level outputs of the subwoofer. A third option uses full-range left and right Pre Out signals into both line inputs.
Auto on/off circuitry, marked auto on the power switch, turns the subwoofer on when it senses a programme signal and off after 15 minutes without one. The PSW 111 is not magnetically shielded, and it comes with a detachable power cord.
Pairing
An AV receiver with a Sub Out or a stereo amplifier with speaker outputs is required.
Alternatives
The Polk PSW 10 is a powered subwoofer from the same PSW series with a 254 mm Dynamic Balance driver.