Hifiverse

Subwoofers - PMC PMC 8 SUB

Description, images, technical data and specifications

PMC PMC 8 SUB
Image source - (c) PMC

The PMC8 SUB is an active studio subwoofer from the British company PMC, which describes it as a true low-frequency reference monitor. It has one 200 mm bass driver with ATL bass loading. It can work as a compact stand-alone subwoofer in conventional multichannel systems, or as an XBD cabinet and stand under a PMC6, creating the full-range PMC6 XBD midfield monitor. The datasheet shows the cabinet lying flat or standing on its end, and the finish is studio black.

Key specs that matter

Drive unit complement is one PMC 200 mm studio 8 LF driver, a custom long-throw design. Amplifier power is 300 W rms from a single Class-D amplifier. Effective ATL length is 3 m. Frequency response is 25 Hz - 500 Hz (-3 dB, 1 m full space, on-axis). Sensitivity is +4 dBu input = 98 dB SPL at 1 m. Max continuous SPL is 109 dB at 1 m and max peak SPL is 121 dB at 1 m, both quarter-space values calculated as +3 dB from a half-space measurement with pink noise of 12 dB crest factor. Latency is 2.4 ms. Cabinet dimensions are 266 x 551 x 440 mm (H x W x D), and weight is 18.5 kg. Mains input is 100 - 240 VAC auto-switching on an IEC C14 inlet, with power consumption of 25 W idle and 300 W max.

Engineering and use context

According to PMC, its Advanced Transmission Line gives a gentler low-order LF roll-off than conventional ported cabinets, for smoother integration of the sub with the height and surround channels of multichannel systems. Control comes from the same DSP engine as in PMC's other active models, with driver protection, room boundary equalisation, EQ and delay/phase options. In XBD mode the DSP joins the PMC6 and the sub into one coherent full-range system.

A single XLR input is switchable between analogue and AES3 digital. On the analogue side the maximum input level is +20 or +24 dBu (selectable) and input impedance is 22 kohm. Digital input accepts 16/24-bit AES3 at 18 - 192 kHz, left, right or left + right, into 110 ohms. An XLR through output carries AES3 at a fixed 24-bit, 96 kHz, and an expansion card slot is reserved for future connectivity upgrades. DSP features are level trim of ±10 dB, high-pass and low-pass filters at 20 - 200 Hz (12 dB/oct), delay of 0 - 30 ms, normal or inverted phase, LF and HF shelving filters (±10 dB, Q 0.707), five bands of parametric EQ and three user presets. Settings are made on the rear panel or in the browser-based SoundAlign web interface over RJ45.

Pairing

The matching monitor for XBD mode is the PMC6. Sources need a balanced analogue or AES3 digital output on XLR.

Alternatives

The PMC8-2 SUB is the twin-driver version, with two 200 mm drivers on independent 400 W Class-D amplifiers.

Specifications

  • Model name

    PMC 8 SUB

  • Frequency Response low +/- 3dB (Hz)

    25

  • Frequency Response high +/- 3dB (Hz)

    500

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    300

  • Size (sm)

    26.6 × 55.1 × 44.0

  • Weight (kg)

    18.5

  • Official link

More components