Hifiverse

Subwoofers - PMC PMC 8-2 SUB

Description, images, technical data and specifications

PMC PMC 8-2 SUB
Image source - (c) PMC

The PMC 8-2 SUB is an active subwoofer from PMC's studio range, intended for full-bandwidth reference monitoring in professional rooms. PMC describes it as a low-frequency monitor like the smaller PMC8 SUB, with the same DSP engine, and quotes higher maximum SPL down to 25 Hz. Its cabinet has the same dimensions as the PMC8-2 midfield monitor. It works as a standalone subwoofer in multichannel systems or as the XBD bass cabinet for the PMC6-2 and PMC8-2.

Key specs that matter

Type is an active subwoofer with twin 8-inch bass drivers and ATL bass loading. Drive units are 2 x PMC 200 mm (8-inch) studio 8 drivers, and effective ATL length is 3 m. Frequency response is 25 Hz - 500 Hz (-3 dB, 1 m full space, on-axis). Sensitivity is 98 dB SPL at 1 m for a +4 dBu input signal. Maximum continuous SPL is 115 dB at 1 m (quarter-space value, calculated as +3 dB from a half-space measurement). Amplifier power is 2 x 400 W rms. Dimensions are 534 x 551 x 440 mm (H x W x D), weight is 37.5 kg, and the finish is Studio black.

Engineering and use context

Each bass driver is powered by its own independent class-D amplifier. Signal enters through one XLR switchable between analogue and AES3 digital. The analogue input accepts +20 or +24 dBu maximum level (selectable) at 22 kohm input impedance, and the digital input takes a 16/24-bit AES3 signal, left, right or left plus right, at 18 - 192 kHz and 110 ohms. An XLR digital AES3 through output runs at a fixed 24-bit/96 kHz, and an expansion card slot is reserved for future connectivity upgrades.

DSP settings include level trim (±10 dB), high-pass and low-pass filters (20 - 200 Hz, 12 dB/oct), delay (0 - 30 ms), phase (normal or inverted), LF and HF shelving filters, five-band parametric EQ and three user presets plus factory defaults, together with DSP driver protection. Latency is 2.4 ms. These settings are reached on the rear panel or through the browser-based SoundAlign software over the RJ45 network port, for one unit or a group. A dedicated XBD configuration mode is built in. Mains input is 100 - 240 V AC auto-switching, with 800 W maximum consumption.

Left- and right-handed cabinets (PMC8-2 SUB-L and PMC8-2 SUB-R) put the bass drivers on the outside edges of a stereo array.

Pairing

A source or controller with a balanced analogue or AES3 digital XLR output is required. As an XBD bass cabinet it matches the PMC6-2 and PMC8-2 monitors. A network connection is required for SoundAlign control.

Alternatives

The PMC8 SUB is the smaller active subwoofer in PMC's studio range.

Specifications

  • Model name

    PMC 8-2 SUB

  • Frequency Response low +/- 3dB (Hz)

    25

  • Frequency Response high +/- 3dB (Hz)

    500

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    300

  • Size (sm)

    53.4 × 55.1 × 44.0

  • Weight (kg)

    37.5

  • Official link

More components