Hifiverse

Subwoofers - Fyne Audio F3-8

Description, images, technical data and specifications

Fyne Audio F3-8
Image source - (c) Fyne Audio

The F3-8 is the smallest of three powered subwoofers in the F3 Series from Fyne Audio, the loudspeaker maker based in Scotland, with the F3-10 and F3-12 above it. Fyne Audio announced the range in November 2018, when the F3-8 was priced at GBP 300 in the UK. Its later list price was GBP 349.99 including VAT per unit, and Fyne Audio currently lists the F3-8 under discontinued models.

Key specs that matter

Output power is 425 W. The drive unit complement is one 200 mm long-throw driver. Its enclosure is vented and down-firing, with a volume of 26 litres. Low frequency response is 35 Hz (-6 dB, typical in room). Bass boost (+3 dB) covers 40 - 70 Hz. Inputs are 2 x phono L and R stereo and 1 x mono LFE, and the input filter is an 80 Hz 2nd-order low pass with LFE provision. Dimensions are 390 x 280 x 328 mm (H x W x D) including feet, and net weight is 13 kg. Mains voltage is 220 - 240 V at 50 Hz nominal. Maximum power consumption is 220 W, and standby power consumption is below 0.5 W (ErP approved).

Engineering and use context

All F3 subwoofers use Direct Digital Amplification (DDX) throughout, which Fyne Audio describes as building on Class D technology with higher power, better efficiency and lower RFI output. Its cabinet is heavyweight and extensively braced. Large diameter ports have a mathematically derived flare profile at both ends for low turbulence. The cone is formed from a mix of fibres to create a light and stiff piston, and a rubber roll surround with a deep coil assembly allows long throw excursion and high power handling.

A DSP engine provides automatic dynamic range management and overload protection. Fyne's Bass Boost switch engages the full power of the DSP for LFE effects in home theatre use. An input switch selects NORMAL mode with the internal 80 Hz low pass filter or LFE mode with that filter switched out. The power mode switch has ON and AUTO positions. In AUTO the subwoofer waits in standby for an input signal and goes back to standby roughly 10 minutes after the signal stops. The cabinet stands on large compliant feet rather than spikes. Finishes are Black Ash and Clear.

Pairing

The LFE input takes the subwoofer output of an AV receiver. A stereo preamplifier with a spare set of outputs connects to the L and R inputs. The 3.5 mm 12 V trigger input (centre pin positive) accepts a trigger signal from an AV receiver.

Alternatives

The F3-10 is the next model up in the F3 Series, with a 250 mm driver, 475 W output power and a 34-litre enclosure.

Specifications

  • Model name

    F3-8

  • Frequency Response low +/- 3dB (Hz)

    40

  • Frequency Response high +/- 3dB (Hz)

    70

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Has internal amplification

    Yes

  • Power amplifier (W)

    425

  • Size (sm)

    39.0 x 28.0 x 32.8

  • Weight (kg)

    13

  • Official link

More components