Hifiverse

Subwoofers - B&W (Bowers & Wilkins) DB3D

Description, images, technical data and specifications

B&W (Bowers & Wilkins) DB3D
Image source - (c) B&W (Bowers & Wilkins)

The DB3D is the most compact of the three twin-driver subwoofers in the Bowers & Wilkins DB Series, below the DB1D and DB2D. Bowers & Wilkins announced the series in February 2017 as the most powerful active subwoofers it had produced. The DB3D was available from May 2017 at USD 2,500, with a UK launch price of GBP 2,300, and it is now listed in the UK at GBP 2,750.

Key specs that matter

A pair of 200 mm Aerofoil cone drive units sits in a balanced configuration, powered by a 1000 W digital amplifier. Frequency response is 10 Hz - 350 Hz (-3 dB, referenced to the level at 100 Hz), and frequency range is 8.5 Hz - 500 Hz (-6 dB). Connections are 2 x XLR, 2 x RCA, 2 x 3.5 mm 12 V trigger and an RS-232 port on a 9-pin D connector. Height is 360 mm, width 320 mm and depth 300 mm, with a net weight of 25 kg. Gloss Black, Satin White and Rosenut cabinets come with Black or Grey grilles.

Engineering and use context

Its two drivers are opposed, back-to-back, and face the sides of the room. According to Bowers & Wilkins, this layout cancels out cabinet resonances. Each Aerofoil cone has a variable thickness and is identical to the cones of the 800 Series Diamond loudspeakers. The enclosure is rigid and low in resonance. Bowers & Wilkins describes the digital amplification as cool-running and energy efficient, and its heat sink is on the underside.

Signal processing is in a digital preamplifier with Dynamic EQ. Every setting is made in the DB Subwoofers app for iOS and Android, connected over Bluetooth Low Energy, and the subwoofer cannot be set up without it. Each input pair, XLR and RCA, has its own configuration - None, Stereo or LFE, a trim level and an input EQ of Flat, Music, Movie or Custom with five bands. With a Stereo input the low-pass filter follows a listed Bowers & Wilkins speaker model or a custom setting.

Trigger 1 switches power-on and standby, Trigger 2 switches input selection, and RS-232 connects to home automation systems. Standby follows automatically after 20 minutes without use, and a standby button is on the front panel. In the box are spikes for carpet, decoupling feet for suspended wooden floors and rubber feet for hard floors, and the cloth grilles are held magnetically.

Pairing

A stereo preamplifier output or the LFE output of an AV processor connects to the XLR or RCA inputs. With LFE the processor sets bass management. Two input pairs allow one subwoofer to serve a stereo system and a home cinema.

Alternatives

The Bowers & Wilkins DB2D is the next model up in the DB Series, with the same 1000 W amplifier rating.

Specifications