The Synchrony T600 is a floorstanding loudspeaker from PSB Speakers of Canada, a division of Lenbrook Industries. PSB introduced it with an all-new driver platform, new enclosure and crossover designs and integrated IsoAcoustics isolation feet. Development took two years under founder and chief acoustic designer Paul Barton, with laser vibrometry, Loudsoft simulation software and prototype measurements in the anechoic chamber of the National Research Council in Ottawa.
Key specs that matter
Design is a five-way transitional array with three 165 mm (6.5 in) woofers, a 133 mm (5.25 in) midrange and a 25 mm (1 in) titanium dome tweeter. Crossover points are 450 Hz (third-order Butterworth) and 1,800 Hz (LR4). Frequency response is 24 Hz - 23 kHz (on axis, ±3 dB), 28 Hz - 20 kHz (on axis, ±1.5 dB) and 30 Hz - 10 kHz (30° off axis), with the low-frequency cutoff at 20 Hz. Sensitivity is 89 dB in an anechoic chamber and 91 dB in a listening room. Impedance is 4 ohms nominal and minimum. Recommended amplifier power is 20 - 300 W, program power 300 W. Dimensions are 228 x 1048 x 343 mm (W x H x D), and weight is 34.9 kg.
Engineering and use context
Woofers and midrange share die-cast aluminium baskets, woven carbon fibre cones and rubber surrounds with added mass at the cone junction. Their motors use shorted turns (Faraday rings) to keep the magnetic force in the voice coil gap constant, and with longer voice coils PSB quotes lower harmonic and intermodulation distortion. Below the midrange sits the tweeter, with a neodymium magnet and ferrofluid cooling. Only the top woofer reaches 450 Hz, and the lower two cover progressively narrower bands, so the floor bounce is randomised. Crossover parts are high-voltage low-dissipation film capacitors and high-current inductors, with oxygen-free internal wiring.
Inside the extensively braced MDF enclosure are four chambers - a sealed one for midrange and tweeter and three identically tuned rear-ported woofer chambers. A 5 mm solid aluminium plate clads the front baffle and is suspended between the sidewalls on ten isolation cups. Each tower stands on four outrigger feet with isolators based on the IsoAcoustics GAIA II and comes with two port plugs. Three pairs of insulated gold-plated 5-way binding posts carry removable jumpers. Finishes are Satin Walnut Veneer and High Gloss Piano Black with magnetic grilles.
Pairing
An amplifier stable into 4 ohms is required. The terminals allow tri-wiring, tri-amping, bi-wiring or bi-amping.
Alternatives
The Synchrony T800 is the larger tower of the series, with three 203 mm woofers.