Hifiverse

Floorstanding loudspeakers — Psb Imagine T65

Description, images, technical data and specifications

Psb Imagine T65
Image source - (c) Psb

The Imagine T65 is the largest floorstanding three-way tower in the Imagine series from PSB Speakers of Canada. Its companions are the smaller T54 tower and the B50 two-way bookshelf speaker. PSB states that all three Imagine models inherit technology from its Synchrony and PWM loudspeakers, and it names the PWM on-wall models as the centre and surround channels for an Imagine home theatre system.

Key specs that matter

Driver complement is a 25 mm (1 in) titanium dome tweeter with ferrofluid and neodymium magnet, a 133 mm (5.25 in) woven carbon fibre cone midrange and two 165 mm (6.5 in) woven carbon fibre cone woofers, all cones with rubber surrounds. Crossover points are 600 Hz and 2,000 Hz, both LR4. Frequency response is 28 Hz - 23 kHz (on axis, ±3 dB), 37 Hz - 20 kHz (on axis, ±1.5 dB) and 37 Hz - 10 kHz (30° off axis, ±1.5 dB), with the -10 dB cutoff at 19 Hz. Sensitivity is 88 dB in an anechoic chamber and 90 dB in a typical listening room. Impedance is 8 ohms nominal, 4 ohms minimum. Recommended amplifier power is 20 - 200 W, program power 200 W. Net dimensions are 213 x 986 x 343 mm (W x H x D), and net weight is 20 kg.

Engineering and use context

PSB describes the T65 as a three-way dual bass reflex design with individually tuned woofer chambers. Each chamber vents through its own rear slot port, a layout PSB compares to its PWM series. Sleeve, front and rear baffles and grille frame are MDF, and the grille face is cloth. Gross dimensions with grille, terminals and feet are 213 x 1029 x 352 mm.

At the base, aluminium outrigger bars carry spikes. On the rear panel are two pairs of 5-way gold-plated binding posts, linked by gold-plated jumper bars. Aluminium trim and chamfered edges are shared with the other Imagine models, and the painted finishes are Satin Black and Satin White. In the Imagine range the T65 covers a wider frequency range than the T54 and B50, with the lowest -10 dB cutoff of the three.

Pairing

An amplifier stable into 4 ohms is required. With the jumper bars removed, the terminals allow bi-wiring or bi-amping. The matching centre and surround channels are PSB's PWM on-wall speakers.

Alternatives

The Imagine T54 is the slimmer three-way tower of the series, with a 102 mm midrange and two 133 mm woofers.

Specifications

  • Model name

    Imagine T65

  • Frequency Response low +/- 3dB (Hz)

    28

  • Frequency Response high +/- 3dB (Hz)

    23 000

  • Sensitivity (dB at 1 W/1m)

    88

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    20 - 200

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    21.3 x 98.6 x 34.3

  • Weight (kg)

    20

  • Official link

More components