Hifiverse

Floorstanding loudspeakers - JBL Summit Pumori

Description, images, technical data and specifications

JBL Summit Pumori
Image source - (c) JBL

JBL's Summit Pumori is a 3-way floorstanding reference loudspeaker in the Summit Series, developed at the company's Acoustic Center of Excellence in Northridge, California. JBL calls it the flagship of the series for the 250 mm woofer category. It appeared in 2025 and sits between the stand-mount Summit Ama and the larger Summit Makalu, sharing its compression driver with the Ama and its mid-bass driver with the Makalu. Launch price was USD 29,995 per pair.

Key specs that matter

The patented D2815K is a D2 compression driver with dual 38 mm annular ring Teonex diaphragms and dual motors, mounted on a large HDI Sonoglass horn. Mid-bass comes from the JMW200PB, a 200 mm driver with a triple-layer Hybrid Carbon Cellulose Composite Cone (HC4), a ferrite motor and a treated-cloth accordion-edge surround. Below it, the JW250PB is a 250 mm HC4 woofer with a ferrite motor and a half-forward-roll surround. Both cone drivers have dual inverted spiders, a 63.5 mm voice coil and a cast aluminium frame. Enclosure type is bass reflex with dual rear ports. Inputs are dual sets of binding posts. Dimensions with grille are 1056.5 x 393.3 x 373.0 mm (H x W x D).

Engineering and use context

HC4 combines carbon fibre and pure-pulp materials with a closed-cell foam core, and JBL specifies it for stiffness and mass suited to high output with low distortion. Each of the two cone drivers uses this construction.

The crossover is a MultiCap network, in which JBL uses a greater number of smaller capacitors instead of traditional large ones to reduce ESR. Drivers and crossover components are housed in a cabinet of internally offset, multi-braced and damped curved-wall construction, intended to reduce internal standing waves. Carbon fibre trim surrounds the front baffle.

Custom JBL | IsoAcoustics adjustable isolation feet decouple the speaker from the floor. Finishes are high-gloss black with Summit Platinum accents or high-gloss ebony wood veneer with Summit Gold accents.

Pairing

Dual sets of binding posts allow bi-wiring or passive bi-amping with separate amplifiers. Single-wire connection is also supported.

Alternatives

The JBL Summit Makalu is the larger 3-way floorstanding model, with a 300 mm Differential Drive woofer and the 75 mm D2830K compression driver.

Specifications

  • Model name

    Summit Pumori

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    N/A

  • Weight (kg)

    N/A

  • Official link

Related content

More components