The JBL Studio 680 is a dual 6.5-inch, 2.5-way compression driver floorstanding loudspeaker from the Studio 6 series of HARMAN International in Northridge, California. Its item number is JBLS680DKW, and it is offered in Dark Wood and Wood finishes. Within Studio 6 it is the smaller of the two 2.5-way floorstanding models, below the Studio 690 and the three-way Studio 698. The same series includes the Studio 630 and Studio 620 bookshelf loudspeakers and the Studio 610 wall-mountable surround loudspeaker.
Key specs that matter
Design is 2.5-way bass reflex via a rear-firing tuned port. A 1-inch (25 mm) high-frequency compression driver sits in an HDI waveguide, and two 6.5-inch (165 mm) PolyPlas low-frequency woofers cover the bass and midrange. Crossover frequencies are 600 Hz and 1.8 kHz. Frequency response is 38 Hz - 40 kHz. Sensitivity is 88 dB (2.83 V/1 m), and nominal impedance is 6 ohms. Recommended amplifier power is up to 200 W. Dimensions are 230 x 300 x 1005 mm (W x D x H), and weight is 22.64 kg.
Engineering and use context
JBL specifies the high-frequency unit as its 2414H-1 1-inch compression driver. Every model of the Studio 6 range, from the Studio 610 surround to the floorstanding models, uses the same HDI waveguide and 1-inch compression driver, and PolyPlas cones are used for all low-frequency woofers of the series.
On the front, the cabinet carries a magnetically attached grille. Each loudspeaker is packed singly, with an owner's manual, a warranty card, four carpet spikes and four feet pads.
Pairing
An amplifier or AV receiver rated for 6 ohm loudspeakers is required. The matching centre loudspeakers are the Studio 665C and Studio 625C, and the matching powered subwoofers are the Studio 660P and Studio 650P.
Alternatives
The JBL Studio 690 is the larger 2.5-way floorstanding model of the series, with dual 8-inch (203 mm) PolyPlas woofers and 90 dB sensitivity.