Hifiverse

Floorstanding loudspeakers — DALI RUBIKORE 8

Description, images, technical data and specifications

DALI RUBIKORE 8
Image source - (c) DALI

The RUBIKORE 8 is a stereo floorstanding model in the RUBIKORE series from DALI of Denmark, which also includes the RUBIKORE 2 standmount and the RUBIKORE 6 tower plus on-wall and LCR variants. It is handcrafted and assembled at DALI production facilities in Denmark and aimed at larger listening spaces in high-end stereo and home theatre systems. The UK price is GBP 5,999 per pair, and four finishes are offered - black, white or maroon in high gloss lacquer, plus Natural Walnut. Within the range, the RUBIKORE 2 standmount costs GBP 2,299 per pair.

Key specs that matter

Three 6.5 inch bass and midrange drivers are joined by a hybrid tweeter module in a 2.5 + 0.5 + 0.5-way arrangement, with crossover points at 500 Hz, 800 Hz, 2,400 Hz and 14,000 Hz. DALI quotes a range of 38 Hz to 34,000 Hz within 3 dB, sensitivity of 90.5 dB for 2.83 V at 1 m, nominal impedance of 4 ohm and maximum output of 112 dB at 1 m. Recommended amplifier power is 40 to 250 W. Each tower is 1,100 mm high, 220 mm wide and 444 mm deep, with a weight of 30 kg.

Engineering and use context

The woofers use paper and wood fibre Clarity Cones on Soft Magnetic Compound motor systems. The hybrid tweeter pairs a 29 mm low-loss soft dome, which runs without ferrofluid, with a 17 x 45 mm planar magnetostatic element that handles the top octave. Using a planar magnetostatic element for the highest frequencies and a dome below it follows the hybrid tweeter concept DALI also applies in its OPTICON MK2 series. SMC-KORE inductors are used in the crossover. The staggered crossover points let the three cones share the lower band while only part of the group reaches up to the dome. Each tower is loaded by three Continuous-Flare bass reflex ports, and the cabinet is extensively braced for rigidity. The grille fixes magnetically, cast outrigger stabilisers with spikes come supplied, and bi-wirable terminals are fitted with bridging plates.

Pairing

With its relatively high sensitivity the RUBIKORE 8 needs less power than most towers of its size, although its low nominal impedance means the partner amplifier must cope with a demanding load. The bi-wire terminals also permit running two stereo power amplifiers in a bi-amp setup. For home theatre use, the series includes on-wall and LCR models to complete the front and surround channels around a pair of RUBIKORE 8 towers.

Alternatives

The DALI RUBIKORE 6 is a more compact RUBIKORE tower, listed at GBP 4,499 per pair.

Specifications

  • Model name

    RUBIKORE 8

  • Frequency Response low +/- 3dB (Hz)

    38

  • Frequency Response high +/- 3dB (Hz)

    34000

  • Sensitivity (dB at 1 W/1m)

    90.5

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    40 - 250

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    N/A

  • Weight (kg)

    N/A

  • Official link

More components