Hifiverse

Floorstanding loudspeakers — DALI RUBIKORE 6

Description, images, technical data and specifications

DALI RUBIKORE 6
Image source - (c) DALI

The RUBIKORE 6 is a floorstanding loudspeaker in DALI's RUBIKORE series, below the RUBIKORE 8 and alongside the RUBIKORE 2, RUBIKORE ON-WALL and RUBIKORE CINEMA. DALI developed the series from the technology of the DALI KORE flagship. The range was shown at High End Munich 2024 with deliveries from that summer, and the North American price was USD 8,000 per pair. Each speaker is individually crafted, assembled and tested at the DALI factory in Denmark and comes in High Gloss Black, High Gloss White, High Gloss Maroon or Natural Walnut.

Key specs that matter

This is a bass reflex design with a 2½ + ½-way crossover principle and crossover frequencies of 800 Hz, 2.6 kHz and 14 kHz. Two 165 mm bass/midrange drivers with Clarity Cone paper and wood fibre diaphragms are combined with the DALI Hybrid Tweeter, a 29 mm low-loss soft dome and a 17 x 45 mm planar magnetostatic tweeter. Frequency range is 38 Hz - 34 kHz (±3 dB) and sensitivity is 88.5 dB (2.83 V/1 m). Nominal impedance is 4 ohms, maximum SPL is 110 dB and recommended amplifier power is 40 - 200 W. Bass reflex tuning frequency is 34 Hz. Dimensions are 990 x 200 x 380 mm (H x W x D), and weight including grille is 23 kg.

Engineering and use context

Both woofers work together at low frequencies, while at midrange frequencies only one of them continues up to the Hybrid Tweeter. Their motors are double magnet systems with DALI's patented Soft Magnetic Composite (SMC), and DALI states that the second magnet focuses the magnetic field for lower losses. According to DALI, the paper and wood fibre structure of the Clarity Cone gives a lightweight yet rigid diaphragm with resonance suppression.

Inside the Hybrid Tweeter module sits a new Low-Loss dome with no ferrofluid in the magnet gap, derived from the EVO-K tweeter of the DALI KORE. Its crossover uses SMC-KORE inductors and hand-picked Mundorf capacitors taken from the KORE. SMC material in these inductors gives lower DC resistance, a shorter signal path, less vulnerability to inductor crosstalk and lower current distortion. Continuous Flare reflex ports are intended to maximise port efficiency while minimising turbulence and noise. An internally braced cabinet forms a rigid, inert platform for the drivers.

Pairing

An amplifier stable into 4 ohms is required. The Bi-wire / Bi-amp terminals allow bi-wiring or passive bi-amping. DALI's spike set with aluminium cone outriggers is included and fits the M8 spike threads.

Alternatives

The RUBIKORE 8 is the larger floorstanding model of the series, with three 165 mm bass/midrange drivers in a 1100 mm cabinet weighing 30 kg.

Specifications

  • Model name

    RUBIKORE 6

  • Frequency Response low +/- 3dB (Hz)

    38

  • Frequency Response high +/- 3dB (Hz)

    34000

  • Sensitivity (dB at 1 W/1m)

    88.5

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    40 - 200

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    N/A

  • Weight (kg)

    N/A

  • Official link

More components