Hifiverse

Floorstanding loudspeakers — Audiovector R 6 SIGNATURE

Description, images, technical data and specifications

Audiovector R 6 SIGNATURE
Image source - (c) Audiovector

The R 6 Signature is the entry version of the R 6, a floorstanding loudspeaker from Audiovector of Denmark. Audiovector was founded in Copenhagen in 1979 by Ole Klifoth and is now run by his son Mads Klifoth, and its speakers are handmade in Denmark. The R 6 comes in Signature, Avantgarde and Arreté versions. Under Audiovector's Individual Upgrade Concept the speakers can later be upgraded to a higher level.

Key specs that matter

Principle is 3.5-way with an 8 + 6.5-inch isobaric bass system. The front carries 6.5-inch Audiovector Carbon bass/mid drivers and the R Evotech soft dome treble driver, and crossover frequencies are 100, 350 and 3000 Hz. Frequency response is 28 Hz - 26 kHz. Sensitivity is 92.5 dB/W/m and impedance is 8 ohms. Power handling is 450 W. Dimensions (footprint) are 123.4 x 27.8 x 43.1 cm (H x W x D).

Engineering and use context

In the Isobaric Compound Bass system (ICB) a 6.5-inch internal woofer works in parallel with an 8-inch external down-firing woofer mounted in the bottom. Audiovector states that the masses of the two bass drivers are coupled by the trapped air in their common internal enclosure. A tuned bass reflex port on the front of the loudspeaker vents the system.

Audiovector engineers its drivers in-house and has them built by a Danish supplier. The carbon drive units combine Titanium Coil Technology, large ceramic ferrite magnets and magnesium alloy baskets suspended at three points. Drive units are mounted under the No Energy Storage (NES) concept, and the crossover uses DFF cross-over technology.

Its cabinet is assembled from thick vacuum-pressed shells of high density hardwood (HDF). A teardrop shape and a laminated, dense and heavy rear baffle reduce cabinet resonance and avoid standing waves, and there are no parallel surfaces. Inside, the cabinet is heavily braced and damped with Nano Pore damping plates. All R-series speakers stand on a tilted plinth with a built-in steel spring holding the spikes, and the R 6 comes with M8 spikes.

Standard finishes are Italian Walnut Matte, African Rosewood Piano, Black Piano and White Piano. Custom colours are available on request, and a black cloth grille is included. Freedom Grounding, Natural Crystal Structure treatment, internal shock absorbers and the 3-inch rear-firing midrange driver are reserved for the R 6 Arreté.

Pairing

An amplifier rated for an 8 ohm load is required. In a home theater system the matching centre speaker is the R C from the same R series.

Alternatives

The R 6 Avantgarde shares the R 6 cabinet and isobaric bass system and replaces the soft dome with the R AMT tweeter, with a frequency response of 26 Hz - 52 kHz and 91.5 dB/W/m sensitivity.

Specifications

  • Model name

    R 6 SIGNATURE

  • Frequency Response low +/- 3dB (Hz)

    28

  • Frequency Response high +/- 3dB (Hz)

    26 000

  • Sensitivity (dB at 1 W/1m)

    92.5

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    <450

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    123.4 x 27.8 x 43.1

  • Weight (kg)

    N/A

  • Official link

More components