Hifiverse

Floorstanding loudspeakers — Audiovector R 6 AVANTGARDE

Description, images, technical data and specifications

Audiovector R 6 AVANTGARDE
Image source - (c) Audiovector

The R 6 Avantgarde is a floorstanding loudspeaker from Audiovector of Denmark, the company Ole Klifoth founded in 1979. Audiovector builds the R 6 in three versions - Signature with the R Evotech soft dome, Avantgarde with the R AMT and Arreté with the R AMT Arreté. Under Audiovector's Individual Upgrade Concept a pair can later be upgraded to a higher level.

Key specs that matter

Principle is 3.5-way with an isobaric bass reflex system. Drive units are the R AMT tweeter, 165 mm (6.5 in.) carbon bass/mid drivers and an 8+6.5 in. isobaric bass system. Crossover frequencies are 100 Hz, 350 Hz and 3 kHz. Frequency response is 26 Hz - 52 kHz, and sensitivity is 91.5 dB/W/m. Nominal impedance is 8 ohms, with power handling of 450 W. Dimensions are 123.4 x 27.8 x 43.1 cm (H x W x D, footprint).

Engineering and use context

Audiovector calls the bass arrangement the Isobaric Compound Bass system. It consists of a hand-built 6.5 in. internal woofer and an 8 in. external bottom-mounted woofer, whose masses are coupled by the air trapped in their common internal enclosure. A bass reflex port on the front baffle vents this system.

Its AMT tweeter has neodymium magnets and a lightweight, precision-coated mylar membrane. Each AMT is mounted and decoupled from the cabinet at three points under the No Energy Storage (NES) concept, and it is open to the front and the rear under the Soundstage Enhancement Concept.

Audiovector carbon drivers use titanium voice coils, ceramic ferrite magnets and three-point suspended magnesium alloy baskets, with membranes of cross-woven aramid composite fibres. Audiovector engineers its drive units in-house, a Danish supplier builds them by hand, and the crossovers are co-engineered with them using DFF crossover technology.

Each cabinet is assembled from vacuum-pressed shells of high-density hardwood (HDF), has a teardrop shape without parallel surfaces and a laminated rear baffle. Inside it is heavily braced and damped with Nano Pore plates. All R-series models stand on a tilted plinth with built-in steel springs holding the M8 spikes. The rear-facing 3 in. midrange, Freedom Grounding and internal shock absorbers are reserved for the Arreté. Standard finishes are Italian Walnut Matte, African Rosewood Piano, Black Piano and White Piano, with custom colours on request and a black cloth grille included.

Pairing

A stereo amplifier rated into an 8 ohm load is required. The matching centre speaker at this level is the R C Avantgarde, and the R-Series subwoofer is the R Sub Arreté.

Alternatives

The R 3 Avantgarde is the smaller floorstanding speaker of the same R-Series level, with an R AMT tweeter and a floor bass reflex system.

Specifications

  • Model name

    R 6 AVANTGARDE

  • Frequency Response low +/- 3dB (Hz)

    26

  • Frequency Response high +/- 3dB (Hz)

    52 000

  • Sensitivity (dB at 1 W/1m)

    91.5

  • Impedance (Ohms)

    8

  • Power amplifier requirements (W)

    <450

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    123.4 x 27.8 x 43.1

  • Weight (kg)

    N/A

  • Official link

More components