The Model A3 is a floorstanding loudspeaker from Bryston of Peterborough, Ontario, and the smallest floorstanding model in its A Series. Bryston's loudspeaker range began with the Model T, a project started in 2010 by vice president James Tanner with outside loudspeaker engineers. The A3 is the only 6 ohm floorstanding speaker in the line, and like all Bryston loudspeakers it is manufactured in Canada.
Key specs that matter
Design is three-way bass reflex with two bass drivers, one midrange and one tweeter. Frequency response is 40 Hz - 20 kHz (±3 dB). Sensitivity is 86 dB (2.83 V, 1 m, anechoic), and nominal impedance is 6 ohms. Recommended amplifier power is 10 - 250 W RMS, and maximum SPL is 111 dB at 1 m. Dimensions are 95.3 x 23.5 x 38.1 cm (H x W x D), and weight is 24 kg unpacked.
Engineering and use context
A pair of identical custom 6.5-inch bass drivers sits with a single Bryston midrange and a Bryston titanium dome tweeter, the same tweeter used across the Bryston loudspeaker range. Bryston designs its drivers with modelling and finite element analysis tools and verifies them in its own anechoic chamber and accelerated life test facility. The internal crossover network divides the spectrum between the drivers and, according to Bryston, also corrects small non-linearities of the drive units.
Each cabinet wall is 3/4-inch MDF, fastened to the others with a bracing structure. Two rear ports and a single front vent load the woofers. Bryston uses a fluted port profile intended to eliminate vent noise at high pressures.
Black fabric grilles are supplied, together with padded feet for hard floors and spikes for carpet, both screwed into threaded inserts in the base. Natural Cherry, Boston Cherry and Black Ash are stock finishes, and other wood and vinyl veneers can be ordered. Bryston guarantees its speakers for 20 years.
Pairing
An amplifier stable into 6 ohms is required. Bryston names integrated amplifiers and home theater receivers of modest power as partners. The matching centre channel is the AC1 Mini.
Alternatives
The Model A2 is the next floorstanding speaker up in Bryston's A Series, with a second midrange and tweeter.