Hifiverse

Floorstanding loudspeakers — German Physiks Loreley MK III

Description, images, technical data and specifications

German Physiks Loreley MK III
Image source - (c) German Physiks

The Loreley Mk III is an omnidirectional floorstanding loudspeaker in the Reference Series of German Physiks. It uses the same array of four DDD drivers as the flagship Gaudi in a smaller cabinet and at a lower price. The Loreley Mk III is designed to be bi-amped through an active crossover, and a German Physiks DSP-X digital crossover is supplied with the loudspeaker.

Key specs that matter

This is a 2-way loudspeaker with 360° surround radiation, using four carbon fibre DDD drivers, two 305 mm (12 in) woofers and four 254 mm (10 in) passive radiators. Frequency response is 21 Hz - 24 kHz, sensitivity is 89.8 dB (1 W/1 m) and impedance is 4 ohms. German Physiks quotes a maximum output level of 120 dB and power handling of 1,050 W nominal and 1,600 W short term. Crossover frequency is 180 Hz, with slopes of 12 dB/octave electronic and 24 dB/octave acoustic for the DDD section and 18 dB/octave electronic and 24 dB/octave acoustic for the woofer section. Each speaker measures 700 x 1,800 x 1,000 mm (W x H x D) and weighs approx. 420 kg.

Engineering and use context

In active operation the passive crossover is omitted, and each section of the loudspeaker is driven directly by its own power amplifier. The DSP-X splits the signal at low level, is housed in a heavy steel and aluminium chassis and is pre-configured at the factory. Output levels of its two sections are adjustable from the front panel.

Each loudspeaker has two independent bass enclosures mounted one on top of the other between a top and a bottom plate. No screws or hard connections join them, and an interlocking collar arrangement holds the stack together. Inside each enclosure is a 12 in inverted dome driver with a maximum excursion of 76 mm (3 in) and rare earth magnets. An ultra-wide underhung voice coil and a triple magnet structure reduce power compression. German Physiks states that distortion is typically a tenth of that of conventional 18 in subwoofers at comparable levels, and that output exceeds 110 dB at 18 Hz. Bass cabinets have non-parallel vertical surfaces, internal bracing, Hawaphon damping on each panel and a 1 cm lining of high-density felt cut to fit each panel.

Its DDD drivers sit in small cylindrical aluminium enclosures with MDF end caps, packed with damping material. Each DDD has a 0.15 mm carbon fibre cone, mounted vertically, which works pistonically at low frequencies, then in bending waves and finally in modal radiation. Each speaker is measured, burnt in for at least 12 hours and measured again.

Pairing

Two power amplifiers per channel are required, each of at least 200 W into 4 ohms, one for the DDD section and one for the woofer section.

Alternatives

The Gaudi Mk III is the German Physiks flagship floorstanding loudspeaker with the same four-DDD array.

Specifications

  • Model name

    Loreley MK III

  • Frequency Response low +/- 3dB (Hz)

    21

  • Frequency Response high +/- 3dB (Hz)

    24 000

  • Sensitivity (dB at 1 W/1m)

    89.8

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    4 - 200

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    70.0 x 180.0 x 100.0

  • Weight (kg)

    420

  • Official link

More components