Hifiverse

Floorstanding loudspeakers — Blumenhofer Acoustics Genuin FS 3 MK 2

Description, images, technical data and specifications

Blumenhofer Acoustics Genuin FS 3 MK 2
Image source - (c) Blumenhofer Acoustics

The Genuin FS 3 MK 2 is a two-way floorstanding horn loudspeaker from Blumenhofer Acoustics of Germany and the smallest of the three models in the Genuin series, below the FS 2 MK 2 and the FS 1 MK 3. Blumenhofer calls it its classic reborn. After 10 years the original Genuin FS 3 was overhauled to bring in the company's harmonic construction and a new driver, and the MK 2 carries much bigger components than its predecessor. True-wood veneers can be ordered from the Blumenhofer workshop. Blumenhofer gives a 5-year warranty.

Key specs that matter

Design is two-way, high efficiency, with a floor-ported harmonic bass reflex cabinet. A 25 cm (10 in.) paper woofer with a P2F sandwich paper cone and a ferrite magnet - the larger Genuin models use AlNiCo magnets - works with a 1 in. compression driver that has a 44 mm (1.75 in.) Mylar membrane. Crossover frequency is 1200 Hz. Frequency range is 40 Hz - 20 kHz (±2 dB). Efficiency is 92 dB and impedance is 8 ohms. Maximum power input is 150 W RMS. Dimensions are 990 x 300 x 355 mm (H x W x D), and weight is 25 kg.

Engineering and use context

Blumenhofer developed the 10 in. paper woofer specifically for this model. The compression driver has new membranes and sits behind a brand new horn with a 1 in. throat, developed to match both the compression driver and the bigger woofer. According to Blumenhofer, the MK 2 goes deeper than the original FS 3 and is more friendly to all kinds of power amplifiers.

Its cabinet is made of 18 mm (0.75 in.) birch plywood with structural bracing interaction, and the bass reflex port opens towards the floor. There is no separate chamber for the crossover. A switchable impedance linearisation acts at the crossover frequency and gives a flat impedance curve. The design is time-aligned to the listening spot.

On the rear panel are bi-wiring and bi-amping terminals in gold-plated tellurium copper. Each speaker stands on adjustable spikes and is packed in its own carton, with a packed weight of 30 kg.

Pairing

Blumenhofer specifies the speaker as tube friendly, and solid-state amplifiers are also suitable. The terminals allow bi-wiring or passive bi-amping.

Alternatives

The Genuin FS 2 MK 2 is the larger model in the same series, with a 300 mm paper woofer, a horn throat of 1.4 inches with a 75 mm titanium membrane and 94 dB efficiency.

Specifications