Hifiverse

Floorstanding loudspeakers — Blumenhofer Acoustics Concert X

Description, images, technical data and specifications

Blumenhofer Acoustics Concert X
Image source - (c) Blumenhofer Acoustics

The Concert X is a two-way horn loudspeaker from Blumenhofer Acoustics, the company Thomas Blumenhofer founded in 1977 and still runs from a site in the Augsburg Western Forests nature park near Munich. Its in-house techniques include Bass Horn, Floor Effect and Impedance Linearization. The model belongs to the R&D line next to the Wiki and the DV-3. Development began in 2014, when the company set out to build larger loudspeakers and to understand how two 380 mm woofers can be combined in the same horn.

Key specs that matter

This is a high-efficiency two-way design with a compression driver that has a 51 mm throat and a 100 mm beryllium membrane and two 380 mm paper woofers. Crossover frequency is 850 Hz. Blumenhofer specifies a frequency range of 30 Hz - 20 kHz (±2 dB), efficiency of 108 dB and a nominal impedance of 8 ohms with a flat impedance curve. Maximum power input is 150 W RMS. Each loudspeaker weighs 150 kg, and the warranty period is 10 years.

Engineering and use context

Blumenhofer describes the concept as a horn-loaded open baffle midrange with an air flow duct and a bass face plug. In the bass section a horn sits in an open baffle, and the bass face plug increases the compression factor before the horn. The mid bass part works as a dipole, which the company chose to increase the speed of that part of the construction.

Both the front horn and the cabinet are made of 25 mm birch plywood, with structural bracing interaction inside. The bass horn is optimised for resonance and air flow, and the crossover is external. Time alignment between the compression driver and the woofers is part of the design. Blumenhofer calls the construction modular and of high complexity. Adjustable spikes are used as feet, and the workshop offers true-wood veneers, whose colour and structure vary from one set to the next.

Pairing

Blumenhofer lists the Concert X as tube friendly. Gold-plated tellurium copper terminals allow bi-wiring or bi-amping. For bi-amping, a preamplifier with two sets of outputs is required.

Alternatives

The Blumenhofer Acoustics DV-3 from the same R&D line uses a bass horn with two to six 380 mm woofers and an impedance of 4 - 16 ohms depending on configuration.

Specifications

More components