Hifiverse

Floorstanding loudspeakers — Genesis G7 Foxtrot

Description, images, technical data and specifications

Genesis G7 Foxtrot
Image source - (c) Genesis

The G7 Foxtrot is a passive floorstanding loudspeaker in Series 7, the entry-level range of Genesis Advanced Technologies. This series takes trickle-down technology from the flagship Genesis Prime+, including the same ring-radiator tweeter and crossover components. Every pair is custom-built in Washington State, USA. The range was shown at Capital Audiofest in November 2023, and a 2024 US listing put the Foxtrot at USD 16,999 per pair.

Key specs that matter

Each cabinet has two 25 mm Genesis ring-ribbon tweeters (front and rear), one 140 mm titanium cone mid-woofer and two 203 mm ribbed aluminium cone woofers in isobaric loading. Genesis gives the lower limit as C1 (32.7 Hz). Sensitivity is 88 dB (1 W/1 m), and input impedance is 4 ohms nominal. A Soft/Bright control adjusts the tweeter level by ±4.5 dB. Dimensions are 1350 x 356 x 410 mm (H x W x D), and weight is 39 kg per speaker, or 43 kg in its double carton. The standard finish is hand-rubbed natural bamboo.

Engineering and use context

In the isobaric configuration two identical woofers work in tandem, one hidden inside the cabinet, and Genesis states that this halves the cabinet size needed for a given F3. The company chose it instead of the servo-controlled bass amplifier on cost grounds. With a rear tweeter on its own crossover, wired out of phase to the front one, the Foxtrot is a dipole in the high frequencies. Its tweeter is a circular planar-magnetic design with a photo-etched voice coil 0.013 mm thick and a radiating structure in the form of a 3 mm wide ring, and Genesis quotes response beyond 40 kHz.

Crossover inductors are custom-made with OFC copper windings. Many of the custom capacitors are polypropylene-film and tin-foil types, the others proprietary low time-constant metallised film. Instead of the carbon-fibre constrained-layer sandwich of the flagship models, the cabinet uses a bamboo/MDF composite. It is asymmetrically braced against panel and internal standing waves, a method Genesis developed on the Maestro. An integrated suspension has neoprene vibration absorbers that decouple the cabinet, a skeletal frame acting as a tuned absorber, and spikes for azimuth and tilt adjustment. Both grilles are engineered into the crossover and must stay on. Each pair is run in at the factory, and the plant-based wax finish is Greenguard Gold certified.

Pairing

An amplifier stable into 4 ohms is required. Speaker cables run directly from the speaker-level outputs of the power amplifier to the 5-way Genesis binding posts.

Alternatives

The G7 Samba uses the same cabinet size with one 203 mm servo-active woofer driven by a 250 W Class D amplifier and a lower limit of A0 (27.5 Hz).

Specifications

  • Model name

    G7 Foxtrot

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    88

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    134.6 × 35.5 × 40.6

  • Weight (kg)

    39

  • Official link

More components