Hifiverse

Floorstanding loudspeakers - Göbel High End Epoque Aeon Fine

Description, images, technical data and specifications

Göbel High End Epoque Aeon Fine
Image source - (c) Göbel High End

The Epoque Aeon Fine is a floorstanding loudspeaker in the Epoque Aeon series of Göbel High End, the Bavarian company of Oliver Göbel. It is the smaller of the two Epoque Aeon floorstanding models and a redesign of the earlier Epoque Fine. A Carbon Excellence Aeon bending wave driver is crossed over to cone bass drivers and passive radiators. Göbel High End designs and manufactures the speaker in Germany.

Key specs that matter

Göbel defines the principle as a bending wave loudspeaker with impulse compensating passive radiators. Each speaker has the patented Carbon Excellence Aeon bending wave driver, two Göbel Aeon 18 cm aluminium long-throw bass drivers and four 18 cm aluminium long-throw passive radiators. The crossover point is 160 Hz. Frequency response is 28 Hz - 31 kHz and efficiency is 86 dB (1 W/1 m). Nominal impedance is 4 ohms, with a minimum of 2.8 ohms at 160 Hz in single wiring. Dispersion is 180 degrees at the front from 28 Hz to 31 kHz and at the rear from 28 Hz to 4 kHz. The base measures 43.6 x 55.7 cm (W x D), total height is 125 cm and weight is 105 kg, or 135 kg in the flight case.

Engineering and use context

Its bending wave driver has no rear enclosure. According to Göbel, the phase velocity on the membrane is always higher than the speed of sound in air, and the technology is the result of over 15 years of development.

The bass drivers use aluminium membranes and glass fibre voice coils, and their motor systems are optimised for a linear magnetic field in both directions of the high-excursion range. They are mounted in an array on the front and the rear of the enclosure and are impulse compensated. For a pair, Göbel quotes a total bass driver area greater than that of two 12 inch woofers.

A proprietary multilayered composite is combined with a special aluminium alloy in the enclosure, with massive aluminium baffles and a top element made entirely of solid aluminium. Inside the resonance-optimised bottom plate, the crossover paths for the bending wave driver and for the bass drivers sit in separate chambers. Each network part is hand-wired point-to-point and moulded in damping epoxy.

Standard finishes are white piano lacquer with aluminium parts anodised in natural silver, or black piano lacquer with aluminium in dark space grey. Other colours are available at extra charge.

Pairing

An amplifier stable into loads below 3 ohms is required. Göbel's matching speaker cable is the Lacorde Statement Speaker.

Alternatives

The Epoque Aeon Reference is the larger model of the series, with four bass drivers and eight passive radiators.

Specifications

  • Model name

    Epoque Aeon Fine

  • Frequency Response low +/- 3dB (Hz)

    28

  • Frequency Response high +/- 3dB (Hz)

    31 000

  • Sensitivity (dB at 1 W/1m)

    86

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    43,6 x 55,7 x 125

  • Weight (kg)

    105

  • Official link