Hifiverse

Floorstanding loudspeakers - Göbel High End Epoque Aeon Baforce (Active)

Description, images, technical data and specifications

Göbel High End Epoque Aeon Baforce (Active)
Image source - (c) Göbel High End

The Epoque Aeon Baforce (Active) is the self-powered version of the subwoofer that Göbel High End of Germany calls its flagship. Göbel offers the Epoque Aeon Baforce series in active and passive versions, and its crossover is always a separate unit.

Key specs that matter

This is a closed-chamber subwoofer with sixteen custom Göbel Aeon 229 mm long-throw aluminium sub-bass drivers in a special array. Total cone area is more than 3,600 cm2, with a linear excursion of more than 20 mm. Frequency response is 15 Hz (low frequency cut-off) - 80 Hz (high frequency cut-off). Output power is 16 x 250 W at 1% THD, or 4,000 W in total. The base plate measures 52.5 x 65.5 cm (W x D) and total height is 216 cm. Weight is 355 kg without packaging and 405 kg in the flight case. The passive version is a 4 ohm load weighing 335 kg.

Engineering and use context

Each driver is mounted in its own sealed chamber. The drivers sit symmetrically on the left and right sides of the enclosure and are impulse compensated, and Göbel states that this reduces harmonic distortion and material resonances to nearly one tenth. Its motor system is optimised for a linear magnet field in both directions of the excursion range. Glass fibre voice coils, low-loss spiders and gaskets, extensive ventilation and rigid aluminium membranes complete the driver.

Göbel builds the enclosure from its proprietary multilayered composite material combined with a special aluminium alloy, based on its bending wave technology.

In this version every driver has its own 250 W amplifier and is directly coupled to its output. The amplifiers are specially adapted Class H types with very low output impedance, for a high damping factor and no influence from back EMF. A power supply in its own shielded chamber can briefly deliver four times the peak current the amplifiers need at maximum level and is permanently monitored by a microcontroller. All electronics are mounted in the foot, milled from a solid block of aluminium alloy for control of EMI, crosstalk, heat dispersion and resonance. Standard finishes are real piano lacquer white with natural silver anodised aluminium, or black with dark space grey, and other colours cost extra.

Pairing

The Epoque Aeon Baforce Controller is required. It is a fully analogue, symmetrical active crossover with outputs for up to two subwoofers, a low cut-off of 15-35 Hz with Q of 0.7-4, a high cut-off of 50-100 Hz, phase of 0 or 180 degrees and a linear, 50 Hz or 80 Hz low cut for the main outputs.

Alternatives

The Epoque Aeon Baforce Petite (Active) is Göbel's smaller array subwoofer with eight of the same drivers in a 119 cm tall enclosure.

Specifications

  • Model name

    Epoque Aeon Baforce (Active)

  • Frequency Response low +/- 3dB (Hz)

    N/A

  • Frequency Response high +/- 3dB (Hz)

    N/A

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    Yes

  • Internal amplification power (W)

    16 x 250

  • Size (sm)

    52.5 x 65.5 x 216

  • Weight (kg)

    355

  • Official link