The Edena Evolution is a two-way, two-driver floorstanding loudspeaker from Apertura, the French company of designer Christian Yvon, based in Puceul near Nantes. Apertura presented it in 2018, the year of its 35th anniversary, as an improved version of the Edena with a new tweeter and a new crossover. It follows the line of the earlier Tanagra Signature and Variation.
Key specs that matter
Drive units are a 22 cm Isotactic Matrix mid/woofer and an 8 x 120 mm ribbon tweeter, crossed over at 2.8 kHz. Loading is bass reflex. Frequency range is 35 Hz - 30 kHz (±3 dB). Sensitivity is 89 dB (2.83 V/1 m), and impedance is 8 ohms. Dimensions are 235 x 317 x 1110 mm (W x D x H), or 328 x 317 x 1149 mm with the metal stands. Net weight is 32.4 kg.
Engineering and use context
Its mid/woofer has a woven polypropylene composite cone that Apertura calls Isotactic Matrix, chosen for stiffness, low mass and damping, and a long voice coil for high linear excursion. The new ribbon tweeter uses a flat metallised polymer diaphragm with twice the emissive area of the Edena tweeter. Apertura states that the larger surface reduces ribbon movement and with it distortion.
The crossover follows Apertura's proprietary DRIM structure, with triple attenuation slopes and phase control over the whole bandwidth. Each set of drive units is measured individually and the crossover values are adjusted to that set. Wiring is done by hand on a printed circuit board with 140 µm copper, and the layout avoids magnetic interference between components. Capacitors are of a very high-end type, and the single-wire binding posts are silver-plated pure copper.
The cabinet has two curved sides of different length and no parallel front and back panels. Its panels are a laminar structure of thin layers moulded under pressure, with double thickness on the most critical panels. Inside are a multi-cavity framework, three different damping materials and mechanical locking of the woofer frame. A central cone on the axis of the centre of gravity provides mechanical grounding, and the aluminium stands with spikes come in black or silver anodising. Finishes are satin American walnut and high-gloss figured maple, American walnut, rosewood, piano black and white cream (RAL 9010).
Pairing
The binding posts accept bananas or spades and allow single wiring only. An amplifier rated for an 8 ohm load is required.
Alternatives
The Adamante is an Apertura floorstanding model that combines two 6.5-inch mid-woofers and the bigger ribbon tweeter first used in the Enigma.