The Concentro S 507.2 is a floorstanding loudspeaker in the Concentro 2.0 series from ELAC Electroacustic, handcrafted in Kiel, Germany. ELAC states that it retains the features of the larger Concentro loudspeakers, and its exterior combines the Concentro design with the clean lines of the VELA series. Walnut, Gloss Black and Gloss White finishes are listed, and the US list price is USD 7,699 per speaker.
Key specs that matter
It is a 4-way bass reflex design with four 150 mm woofers with AS cones, one 180 mm low-midrange driver with an AS-XR cone, one 50/130 mm high-midrange driver with an aluminium cone and a JET 6 tweeter. Crossover frequencies are 120 Hz, 400 Hz and 2.6 kHz. Frequency range is 24 Hz - 50 kHz (IEC 268-5), and sensitivity is 88 dB (2.83 V/1 m). Nominal impedance is 4 ohms, with a minimum of 3.0 ohms at 360 Hz. Power handling is 240 W nominal and 300 W peak. Dimensions are 1220 x 270 x 380 mm (H x W x D) with spikes and washers, and weight is 37 kg.
Engineering and use context
ELAC calls the upper driver assembly stepX-JET. It is a concentric driver in which the JET 6, a folded ribbon tweeter, sits at the centre of a midrange driver with an aluminium membrane. This layout aligns the acoustic centres of the two drivers and controls their dispersion. Its directivity in the midrange is set by exchangeable DCRs (Directivity Control Ring), a patented ELAC technology, and three aluminium DCRs are included as standard.
Four long-throw woofers are side-firing and arranged in ELAC's ICD configuration (Impulse Compensated Design) against unwanted mechanical vibrations. According to ELAC, its crystal membrane driver geometry increases stiffness and helps control unwanted resonance across the operating range of the driver.
Each cabinet has a trapezoid basic shape, a wraparound baffle and gently angled side walls. A separate bottom assembly raises the body in what ELAC describes as a high-heel effect, and it also gives the speaker a stable footing. Supplied with the speaker are a bi-wiring set, a spike set with washers and gloves.
Pairing
Recommended amplifier power is 60 - 500 W per channel. ELAC lists the speaker as suitable for amplifiers rated for 4 - 8 ohm loads, and an amplifier stable into 3 ohms is required. The supplied bi-wiring set allows bi-wiring.
Alternatives
The Concentro S 509.2 (CFS509.2) is another floorstanding loudspeaker in the ELAC Concentro 2.0 series.