Hifiverse

Floorstanding loudspeakers - ELAC CONCENTRO M 807

Description, images, technical data and specifications

ELAC CONCENTRO M 807
Image source - (c) ELAC

Concentro M 807 is a four-way floorstanding loudspeaker from ELAC Electroacustic of Kiel, Germany. At its centre is ELAC's VXe (Variable Coaxial Electric) technology. Its sculpted cabinet has a three-dimensional baffle, angled side panels, a sculpted rear and a sculpted aluminium base, with die-cast or solid-milled aluminium parts. Finishes are Black High Gloss and White High Gloss, with deco rings in black or grey.

Key specs that matter

Design is four-way bass reflex. Drive units are two 250 mm AS cone woofers, two 115 mm AS-XR cone low-midrange drivers, six 40 mm A-XR cone high-midrange drivers and a JET 6c tweeter. Crossover frequencies are 150, 650 and 2650 Hz. Frequency range is 24 - 50,000 Hz (IEC 268-5), and sensitivity is 88 dB (2.83 V/1 m). Impedance is 4 ohms nominal, 3.1 ohms minimum at 350 Hz. Nominal power handling is 300 W and peak power handling 400 W, with a recommended amplifier power of 80 - 600 W per channel. Each speaker measures 1340 x 461 x 595 mm (H x W x D) and weighs 62 kg.

Engineering and use context

Six A-XR (Aluminium - eXtended Range) drivers form the circular VXe 6 array, which ELAC describes as a ring radiator, and the centrally positioned JET 6c tweeter completes a concentric mid-high frequency system. Every JET 6c is handcrafted. The two 115 mm low-midrange drivers enclose the array and have an aluminium sandwich construction. ELAC positions the two 250 mm aluminium sandwich woofers for impulse compensation.

A rotary switch on the rear panel sets the directivity of the VXe unit. In the centre position all VXe drivers operate in unison as a larger virtual point source, and the outer and inner positions shift the balance between direct and diffuse sound for symmetrical or asymmetrical radiation. ELAC quotes 25 configuration options per pair.

Non-parallel surfaces and six-axis milled reinforcements inside the cabinet suppress standing waves. Under an aluminium cover, the crossover network uses film capacitors, air coils and MOX resistors. Dual gold-plated binding posts with black-chrome clamping nuts are on the rear panel. Adjustable isolation feet, a bi-wiring set, a polishing cloth and transport straps are supplied.

Pairing

An amplifier stable into 4 ohms is required. The dual terminals allow single-wiring, bi-wiring or bi-amping.

Alternatives

The CFS509.2 is another floorstanding speaker in ELAC's Concentro 2.0 series.

Specifications

  • Model name

    CONCENTRO M 807

  • Frequency Response low +/- 3dB (Hz)

    24

  • Frequency Response high +/- 3dB (Hz)

    50 000

  • Sensitivity (dB at 1 W/1m)

    88

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    400

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    134.0 × 46.1 × 59.5

  • Weight (kg)

    62

  • Official link

Related content

More components