Hifiverse

Floorstanding loudspeakers - Alsyvox CARAVAGGIO

Description, images, technical data and specifications

Alsyvox CARAVAGGIO
Image source - (c) Alsyvox

The Caravaggio is a four-way dipole panel loudspeaker from Alsyvox, a company based in Valencia, Spain, that makes its speakers by hand with Italian design. Every model in the range carries the name of an Italian painter - Tintoretto, Botticelli, Caravaggio, Raffaello and Michelangelo. The Caravaggio is made on request only and adds one way to the smaller Tintoretto and Botticelli, with a ribbon-planar woofer, a new ribbon midrange, a ribbon tweeter and a ribbon super-tweeter on one panel per channel.

Key specs that matter

Frequency response is 20 Hz - 40 kHz, reference sensitivity is 94 dB and nominal impedance is 4 ohms. Crossover frequencies are 500 Hz, 1.5 kHz and 5 kHz. The single woofer is 320 mm wide, with a surface of 5,376 cm2, a maximum stroke of 20 mm and an air volume of 10,752 cm3. Midrange width is 2 x 35 mm, mid-tweeter width is 25 mm and super-tweeter width is 5 mm. Each panel is 2,030 mm high, 690 mm wide and 54 mm thick, and weighs 165 kg without its crossover. Alsyvox recommends it for rooms of 40 - 120 m2.

Engineering and use context

All Alsyvox speakers are dipoles that approximate the concept of a line source. The woofer is a push-pull ribbon (planar) design, and according to Alsyvox it merges the wide surface of planar speakers with the long stroke of cone speakers. Push-pull construction is used in every transducer for low harmonic distortion, and the proprietary diaphragms are driven over almost their entire surface. All ways use the same diaphragm and magnet materials.

Its structure is heavy gauge steel, standing on proprietary inertial feet. Acrylic, PVC and solid teak are chosen for their vibration damping. The standard finish is black glossy acrylic with natural teak profiles.

Two acrylic external passive crossovers with an exclusive topology are supplied, each 510 x 330 x 130 mm and 30 kg with its transparent acrylic base, together with the connecting cables between speaker and crossover. Their components are Duelund, Mundorf and Jantzen parts. XX crossovers with larger, higher-quality components are available on request, at 680 x 450 x 130 mm and 50 kg each. Every pair is broken in and fine-tuned by the designer, covered by a 5-year limited warranty and shipped in custom flight cases.

Pairing

An amplifier rated for 4 ohm loads is required. The amplifier connects to the external crossovers, single-wired as standard or bi-wired on request. A dedicated subwoofer panel per channel can be added in rooms from 80 m2.

Alternatives

The Raffaello is another Alsyvox floorstanding panel made on request, with a double mid-tweeter and a double woofer at the sides of a central super-tweeter.

Specifications

  • Model name

    CARAVAGGIO

  • Frequency Response low +/- 3dB (Hz)

    20

  • Frequency Response high +/- 3dB (Hz)

    40 000

  • Sensitivity (dB at 1 W/1m)

    94

  • Impedance (Ohms)

    4

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    203.0 × 69.0 × 5.4

  • Weight (kg)

    150

  • Official link

More components