Hifiverse

Floorstanding loudspeakers - Audio Note AZ-Two Deluxe

Description, images, technical data and specifications

Audio Note AZ-Two Deluxe
Image source - (c) Audio Note

The AZ-Two Deluxe is a floorstanding loudspeaker from Audio Note (UK). It is a rear-loaded, folded quasi-parabolic horn design with a rear-facing mouth and two drive units per cabinet. In Deluxe form the cabinet is chipboard and MDF with a Black Ash real wood veneer, and the bass driver comes with either a grey/black paper cone or a blue Hemp cone.

Key specs that matter

Characteristic impedance is 6 ohms and sensitivity is 93 dB (1 W/1 m). Frequency response is 45 Hz - 20 kHz (±6 dB, in room). Minimum amplifier power is 7 W RMS per channel, and maximum amplifier power is 120-125 W (unclipped) RMS per channel peak. Drive units are a 203 mm paper-cone bass driver with a foam surround and a copper voice coil, plus a 19 mm polyamide dome tweeter. Each speaker measures 900 x 250 x 300 mm (H x W x D) and weighs 14 kg.

Engineering and use context

According to Audio Note, a correctly designed horn-loaded system allows the acoustic impedance to be optimised for the driver across several octaves, with higher efficiency as the result. For a simple horn, a -3 dB cut-off at 50 Hz would need a mouth area of 3.8 m2. Audio Note reconfigured the size and shape of the rear horn flare so that the increasingly capacitive throat impedance is offset to a point below the cut-off frequency. Near a corner, the radiation impedance falls further and the effective bass horn mouth area grows by a factor of around 16, or 8 against a rear wall.

Its bass unit is the same as in the AN-J and AN-E, and the tweeter is the one used in the AN-K models. A heavy-duty crossover with air-core inductors, AN-D copper internal wiring and Audio Note silver-plated speaker terminals complete the signal path. Each stereo pair goes through a dynamic matching process, in which every speaker is matched to a master curve and to its partner.

Eight threaded spikes with locking nuts come in the box, four for the threaded holes in the base of each cabinet. Two pairs of binding posts, HF and LF, are joined by links, and removing the links splits the crossover.

Pairing

The intended partners are Audio Note's own low-powered tube amplifiers. Tube and transistor amplifiers within the stated power range are also suitable. The split terminals allow bi-wiring or bi-amping with two stereo or four mono power amplifiers.

Alternatives

The standard AZ-Two has the same driver complement in a chipboard cabinet with a vinyl wrap veneer.

Specifications

  • Model name

    AZ-Two Deluxe

  • Frequency Response low +/- 3dB (Hz)

    45

  • Frequency Response high +/- 3dB (Hz)

    20 000

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    6

  • Power amplifier requirements (W)

    7 - 125

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    90.0 x 25.0 x 30.0

  • Weight (kg)

    14

  • Official link

More components