Hifiverse

Floorstanding loudspeakers - Audio Note AN-E

Description, images, technical data and specifications

Audio Note AN-E
Image source - (c) Audio Note

The AN-E is a two-way ported loudspeaker from Audio Note (UK) and the name of a whole family of versions. Every version has a 25 mm tweeter and a 203 mm bass driver, and they differ in drivers, internal cable and crossover parts. The range runs from the AN-E/D and the LX and SPe models through the Signature versions to the SPx Alnico, the SEC Silver, the SEC Signature and the AN-E SOGON. Only the Signature and SOGON models have external crossovers, with an aluminium or black crossover fascia. Hemp cones are blue and paper cones are grey/black.

Key specs that matter

Characteristic impedance is 6 ohms. Frequency response is 18 Hz - 23 kHz (±6 dB, in room). Minimum amplifier power is 7 W RMS per channel and maximum amplifier power is 150 W (unclipped) RMS per channel. Efficiency is 94 dB for the standard paper and Hemp versions, 95 dB for the SPx Alnico and SEC Silver, 96 dB for the SEC Signature, 97.5 dB for the HE models with internal crossover and 98 dB for the HE Signature models. Cabinets are birch ply (chipboard/MDF for /D models) with a real wood veneer. Dimensions are 790 x 360 x 270 mm (H x W x D), and weight is 23 kg (internal crossover models).

Engineering and use context

Audio Note tailors the cabinet to place its resonances in frequency bands where they aid the drive units. Finnish birch ply forms the entire cabinet, bracing and internal damping are kept to a minimum, and its shallow cabinet has a wide baffle. Its crossover is essentially first order and hardwired, with air-cored chokes and bipolar and polypropylene capacitors in copper or silver foil depending on model. Internal cable is 99.99% pure copper or 99.99% pure silver Audio Note wire. A dynamic matching process brings each speaker of a pair to within 0.4 dB of a master curve and of its partner, and Audio Note tests 100% of its production.

Bass drivers use paper or Hemp paper cones, and the tweeter has an impregnated silk dome. Standard drivers have copper voice coils, HE drivers have silver voice coils, and the Alnico, SEC and SOGON models use AlNiCo magnets on tweeter and woofer. In Signature versions the crossover sits in an external non-magnetic aluminium chassis linked by 1.5 m of bi-wired cable. The SOGON has an all-silver crossover with silver foil capacitors and silk-insulated silver wire inductors held to ±0.1 dB between the speakers of a pair. A 254 mm black sprayed steel stand for filling with fine sand or metal shot is available.

Pairing

Audio Note designs the AN-E primarily for tube amplification, and transistor amplifiers are also listed. The split HF and LF terminals allow bi-wiring or bi-amping.

Alternatives

The AN-J is the related Audio Note loudspeaker with a 25 mm tweeter and a 203 mm bass driver.

Specifications

  • Model name

    AN-E

  • Frequency Response low +/- 3dB (Hz)

    18

  • Frequency Response high +/- 3dB (Hz)

    23 000

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    6

  • Power amplifier requirements (W)

    17 - 150

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    79.0 x 36.0 x 27.0

  • Weight (kg)

    23

  • Official link

More components