Hifiverse

Bookshelf Speakers - Kanto Audio YU

Description, images, technical data and specifications

Kanto Audio YU
Image source - (c) Kanto Audio

The YU is a powered two-way bookshelf speaker system designed by Kanto in Canada. Kanto announced it in March 2020 at USD 249.99 per pair. It belongs to the first generation of the YU series, now discontinued, and was offered in matte black and matte white. The active left speaker holds the amplifier, controls and inputs, and the passive right speaker connects to its right channel output terminals with the supplied speaker wire.

Key specs that matter

Each cabinet has a 25 mm silk dome tweeter and a 102 mm Kevlar woofer with a 2-way crossover at 2.0 kHz. Amplifier type is class D, rated at 140 W peak (70 W total RMS) into a nominal impedance of 4 ohms. Frequency response is 60 Hz - 20 kHz. Input sensitivity is 560 mV and total harmonic distortion is below 0.25%. Inputs are 1 x RCA L/R and Bluetooth 4.2 with Qualcomm aptX, and there is one subwoofer output. Each speaker measures 140 x 220 x 190 mm (W x H x D). Net weight is 2.8 kg for the active speaker and 2.4 kg for the passive one.

Engineering and use context

Both speakers use MDF cabinets, and knurled binding posts link the active unit to the passive one. On the front panel, one knob combines volume, input selection and standby. Rotating it sets the level, a push toggles between RCA and Bluetooth, and a push and hold enters or leaves standby. A status LED is white in playback, yellow in standby, flashes yellow on mute and turns blue for Bluetooth. Auto power-down puts the amplifier into standby after 15 minutes without a signal, and auto power-up wakes it when the signal returns on the same input. Either function can be disabled by holding a reset key on the remote for 5 seconds.

That remote runs on two AAA batteries and carries standby, input selection, Bluetooth reset, volume, bass and treble with reset keys, mute, balance and Bluetooth track controls. Kanto recommends a distance of less than 10 m to a Bluetooth source. A 1/4-20 threaded mounting hole is on the bottom of each speaker. Mains input is AC 100 - 240 V at 50/60 Hz with automatic switching, and standby consumption is under 0.5 W. A power cord, the speaker wire and eight self-adhesive rubber feet are included, and the warranty is 2 years.

Pairing

This system must not be connected to the speaker outputs of a stereo amplifier. A turntable requires an external phono stage. Its mono subwoofer output matches the Kanto sub8. Matching stands are the Kanto SP26PL and SP32PL floor stands and the S4 and SP9 desktop stands.

Alternatives

The Kanto YU4 is a powered two-way pair of the same cabinet size from the YU series, with two optical inputs and a phono preamp.

Specifications

  • Model name

    YU

  • Frequency Response low +/- 3dB (Hz)

    60

  • Frequency Response high +/- 3dB (Hz)

    20 000

  • Sensitivity (dB at 1 W/1m)

    N/A

  • Impedance (Ohms)

    N/A

  • Power amplifier requirements (W)

    N/A

  • Has internal amplification

    Yes

  • Internal amplification power (W)

    70 RMS (140 Peak)

  • Size (sm)

    14 x 19 x 22

  • Weight (kg)

    2.40

  • Official link

More components