The S150 is a passive monitor loudspeaker from M&K Sound, the Miller & Kreisel brand, and the model that has defined its 150 range from the beginning. M&K presents this version as the first true update to the classic S150, using technologies and selected components from the redesigned S300. The S150 THX Ultra2 Monitor carries THX certification, and M&K names reference monitoring for professional cinema sound design or stereo recording, as well as home theatre installations, as its applications.
Key specs that matter
The driver complement is two 133 mm (5.25 in.) fibreglass bass/midrange drivers and three 28 mm (1.1 in.) soft fabric dome tweeters. Frequency response is 75 Hz - 20 kHz (±3 dB). Sensitivity is 92 dB (2.83 V/1 m), and impedance is 4 ohms. Recommended amplifier power is 25 - 500 W. Dimensions are 318 x 266 x 308 mm (H x W x D), weight is 11.5 kg, and the finish is black satin.
Engineering and use context
All three tweeters sit on a one-piece heavy-duty cast aluminium Triple Tweeter Array plate. Each has a coated soft dome, a 28 mm vented voice coil, a resonance-damped magnet system with a vented pole piece and aluminium distortion-killer rings, and an integrated waveguide combined with a short horn load.
M&K engineers design the bass/midrange unit in-house, and its cone and surround were developed together with the Danish transducer company Peerless. It uses an extra-stiff coated fibreglass cone with a special M&K profile geometry, a low-loss SBR rubber surround with an edge resonance stabiliser and 8.5 g of moving mass. Its thermally stable voice coil, rated for up to 250 degrees Celsius, is wound on an aluminium former and works as an overhung coil in a strontium ferrite magnet system. According to M&K, the magnetic field stays linear over the full coil length up to the maximum excursion of ±3.5 mm. A shielding magnet and can reduce stray field emissions.
Each woofer has a completely open cast aluminium basket with four solid pillars and a cup spider. Pin-cushion basket geometry with a narrow flange places the two woofers close together on a compact baffle. Phase-focused crossovers are optimised for low crossover points and transient control.
Pairing
An amplifier stable into 4 ohms is required. A subwoofer is required for full-range playback. The matching surround model is the S150T Tripole, which uses the same high-frequency driver, and the MP150 is the wall-mount version.
Alternatives
The S300 keeps the triple-tweeter and dual-woofer baffle layout of the S150 and adds separate die-cast tweeter and woofer mounting brackets.