The MPS2520P is an active studio monitor in the Pro Series of M&K Sound, the company that traces its roots to Miller & Kreisel and now operates under Danish ownership. Its current version is sold as the New Edition in a Black satin finish. M&K places five loudspeaker units in an ultra-compact cabinet and names reference recordings, editing, processing and master mixing for music and movie productions as its uses.
Key specs that matter
Two 133 mm glassfibre bass-midrange drivers and three 28 mm soft fabric domes make up the driver complement. Dual-channel power amplifiers are rated at 200 W RMS (400 W peak) for the bass-midrange section and 180 W RMS (360 W peak) for the high-frequency section. Frequency response is 80 Hz - 12 kHz (±1 dB) and 12 - 20 kHz (±2 dB). THD is 0.002% into 4 ohms for the LF channel and 0.03% into 4 ohms for the HF channel, and signal-to-noise ratio is 100 dB. Maximum output level is 110 dB at 100 Hz. Each monitor measures 327 x 270 x 401 mm (H x W x D) and weighs 18 kg.
Engineering and use context
Both bass-midrange drivers are in a sealed box with a Q of 0.707, which M&K chose for control of the system step response. Its three tweeters are stacked vertically and operate down to 1.2 kHz. A vertical directivity control sets the dispersion to Wide (50 degrees) or Narrow (30 degrees). Its high-pass filter is fixed at 80 Hz with a 24 dB slope and is intended for integration with M&K subwoofers.
Input sensitivity is 100 mV unbalanced or 200 mV balanced for 90 dB at 1 m, input impedance is 11 kohms unbalanced and 22 kohms balanced, and maximum input is 24 dBu balanced. Power consumption is 17 W in standby, 45 W on average and 360 W maximum. Mains ratings are 115 VAC/60 Hz at 5 A and 230 VAC at 3.15 A.
Pairing
Balanced and unbalanced inputs accept a studio interface, a preamplifier or an AV processor output. A subwoofer, such as an M&K model, is required below 80 Hz.
Alternatives
The MPS1620P is the smaller active Pro Series monitor, with a 165 mm polypropylene woofer, a 25 mm soft dome tweeter and 100 W plus 50 W RMS amplification.