Hifiverse

Bookshelf Speakers - Proficient Audio Protege LB62

Description, images, technical data and specifications

Proficient Audio Protege LB62
Image source - (c) Proficient Audio

The Protege LB62 is a compact passive two-way speaker belonging to the Protege series from Proficient Audio, an American brand focused on speakers for custom installation and home theater. Supplied in pairs and finished in matte black, it was designed to run in plain two-channel use or handle the left and right fronts of a surround layout, where the matching Protege LDA5 module can sit on its top panel to add overhead channels for Dolby Atmos and DTS:X soundtracks. The same series also contains the LFS6 floorstanding speaker, which the LDA5 manual lists as a second compatible base speaker.

Key specs that matter

A 6 inch woofer with a graphite cone works with a 1 inch silk dome tweeter inside every enclosure. Proficient rates frequency response at 74 Hz to 20 kHz, impedance at 6 ohm and sensitivity at 87 dB measured with 2.83 V at 1 m. Power handling is listed as 100 W. The enclosure measures about 33.3 cm high, 21.4 cm wide and 24.1 cm deep.

Engineering and use context

The cabinets are built from MDF with rounded corners, and the removable black grilles are held in place by neodymium magnets, so they can be taken off without visible pegs or holes on the baffle. For installers the LB62 has integrated flush mounted single-slot keyholes on the back for hanging directly on a wall, plus threaded brass inserts that accept OmniMount 15.0 wall or ceiling brackets when the speaker has to be angled toward a seating area. With its limited bass extension the design leaves the deepest bass to a subwoofer in most home theater systems, and its compact depth suits shelves, media units and wall positions in rooms of around 20 m2. Proficient covers the speakers with a limited ten-year warranty for the original retail purchaser covering faulty materials and workmanship.

Pairing

The impedance is within the range most AV receivers and integrated stereo amplifiers are specified to drive, and the power handling figure gives an upper guide for amplifier choice. In a receiver based system the LB62 is best combined with a powered subwoofer, with the bass management of the receiver sending low frequencies to the sub. Adding a pair of LDA5 height speakers on top turns the front pair into a height capable array without further mounting work.

Alternatives

Proficient also builds the Protege LB52, a more compact bookshelf pair with a 5 inch woofer.

Specifications

  • Model name

    Protege LB62

  • Frequency Response low +/- 3dB (Hz)

    74

  • Frequency Response high +/- 3dB (Hz)

    20 000

  • Sensitivity (dB at 1 W/1m)

    87

  • Impedance (Ohms)

    6

  • Power amplifier requirements (W)

    100

  • Has internal amplification

    N/A

  • Internal amplification power (W)

    N/A

  • Size (sm)

    33.3 x 21.4 x 24.1

  • Weight (kg)

    N/A

  • Official link