The PMC 6-2 XBD is a twin-cabinet, three-way active midfield reference monitor system with ATL bass loading from PMC of Biggleswade, England. It is formed by adding a PMC8-2 SUB unit to a PMC6-2 monitor, and PMC aims it at high-end music production. In XBD configuration the sub reinforces the bass output of the main speaker's LF drivers, increasing headroom and extending the bass down to 25 Hz.
Key specs that matter
System frequency response is 25 Hz - 25 kHz (-3 dB, 1 m, full space, on-axis). The PMC6-2 carries two PMC 150 mm studio 6 LF drivers, a PMC 55 mm soft dome midrange and a PMC 27 mm soft dome tweeter, with an effective ATL length of 2 m. Its Class-D amplifiers deliver LF 2 x 400 W rms, MF 400 W rms and HF 400 W rms. On its own the PMC6-2 is rated 33 Hz - 25 kHz (-3 dB), with +4 dBu input = 98 dB SPL at 1 m, 109 dB maximum continuous SPL and 121 dB peak SPL. Directivity is ±50 degrees horizontal and +60/-40 degrees vertical (-6 dB at 10 kHz). It measures 400 x 430 x 372 mm (H x W x D) and weighs 21.3 kg. Below it, the PMC8-2 SUB has a 3 m effective ATL, 25 Hz - 500 Hz response and 115 dB maximum continuous SPL, and measures 534 x 551 x 440 mm at 37.5 kg.
Engineering and use context
The input connects directly to the PMC6-2, and an AES3 digital cable carries its through output (24-bit, 96 kHz) down to the PMC8-2 SUB. Both cabinets link to a LAN or directly to each other through their RJ45 network ports. Selecting the dedicated XBD mode makes the DSP combine both units into a single larger monitor, and in the browser-based SoundAlign software the pair appears as one PMC6-2 XBD unit. Settings are also available from the rear-panel controls. DSP functions cover a ±10 dB level trim, a 20 - 200 Hz high-pass filter at 12 dB per octave, 0 - 30 ms delay, normal or inverted phase, LF and HF shelving filters, five-band parametric EQ and three user presets, with 2.4 ms latency. Mains input is 100 - 240 V AC auto-switching through an IEC C14 socket, and the PMC6-2 draws 50 W at idle and 1500 W maximum. An expansion card slot is reserved for future connectivity upgrades, and dedicated floor stands are optional.
Pairing
The XLR input switches between analogue up to +20 or +24 dBu at 22 kOhm and AES3 digital at 16 or 24-bit, 18 - 192 kHz, 110 ohms. An audio interface, monitor controller or console with a balanced line or AES3 output is required. No external amplifier is needed.
Alternatives
The PMC8-2 XBD is the larger twin-cabinet monitor system in the PMC studio range.